Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Ball lock pins GN 113.11 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.
The technical appendix contains the load capacities for the double-sided shearing resistance (breaking strength).
Pin
Stainless steel AISI 303
L-Handle
Plastic (Polyamide PA), black
Temperature resistant up to 80 °C
Balls
Stainless steel AISI 420C
Pressure spring
Stainless steel
German Material No. 1.4565
RoHS
Ball Chains GN 111
Ball Chains GN 111.5
Retaining Cables GN 111.2
Retaining Cables GN 111.2
Spiral Retaining Cables GN 111.4
| d1 -0,04 / -0,08 | l1 +0,6 | d2 | d3 | d4 | l2 ±1 | l3 | l4 | Location bore H11 |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | - | - | - | 5,5 | 17,5 | 13,5 | 6 | 26,5 | 33 | 5 |
| 6 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | - | - | - | 7 | 17,5 | 13,5 | 7 | 26,5 | 33 | 6 |
| 8 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | - | 9,5 | 23 | 18 | 8,2 | 34 | 43,5 | 8 |
| 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 12 | 23 | 18 | 9,6 | 34 | 43,5 | 10 |
| 12 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | - | 14,5 | 30,5 | 24 | 10,6 | 40,5 | 58 | 12 |
| 16 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 19 | 30,5 | 24 | 14 | 40,5 | 58 | 16 |
| 20 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | - | - | - | - | 25 | 40,5 | 33 | 20,5 | 51,5 | 72,5 | 20 |
| 25 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | - | - | - | - | 30,8 | 40,5 | 33 | 22 | 51,5 | 72,5 | 25 |
|
Information At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage. The values were arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values. An appropriate safety factor must be taken into account in the design. |
||||||||||||||||||||||||||||||
|
Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength) |
|||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
