Hinges GN 2295

GN 2295 Hinges, for Aluminum Profiles / Panel Elements, Three-Part, Vertically Elongated Outer Leafs Type: A - Exterior hinge leafs
Coding: C - With countersunk holes
l<sub>2</sub>: 245

Type: A - Exterior hinge leafs
Coding: C - With countersunk holes
l₂: 245

Accessories for profile systems

Standard Parts in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show all compatible products

Standard sheet GN 2295 Print this page Mounting information List of Hinge Types Plastic Characteristics Operating Instruction for GN 2290

Product description

Hinges GN 2295 are made of drawn profiled aluminum and are used on doors and covers, for example.

Given the external hinge leafs, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.

The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized (if needed, also by shortening the middle wing) thanks to the modular design and available accessories.

Specification

Hinge leafs
Aluminum
Anodized, natural colorEL

Bearing bushing / Cover cap
Plastic, Polyamide (PA)
Graphite gray, RAL 7024

Tapered dowel pin ISO 8741
Steel
Zinc plated, blue passivated

RoHS

On request

Other lengths and hole spacings
Other finishes