Cart

The cart is empty.

Quote Request
English / United States
Current selection: English / United States
Ganter worldwide
Language Deutsch English Español Français Suomeksi Italiano
Deliver to
United States
Group Websites
Show all
You are here: Product Overview  >  3.3 Hinging, Latching, Locking of Doors and Covers  >  Hinges, Detachable  >  GN 2294 Hinges previous product next product

GN 2294 Hinges Detachable, for Aluminum Profiles / Panel Elements

Photo

GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements Type: A - Exterior hinge leafs Coding: C - With countersunk holes l<sub>2</sub>: 82
Type: A - Exterior hinge leafs
Coding: C - With countersunk holes
l2: 82
GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements Type: A - Exterior hinge leafs Coding: C - With countersunk holes l<sub>2</sub>: 82 GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements Type: A - Exterior hinge leafs Coding: C - With countersunk holes l<sub>2</sub>: 162 GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements Type: I - Interior hinge leafs Coding: C - With countersunk holes l<sub>2</sub>: 162 GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements Type: I - Interior hinge leafs Coding: C - With countersunk holes l<sub>2</sub>: 82
Accessories-for-profile-systems

Accessories for profile systems

Standard Parts in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm
Show all compatible products
Standard sheet GN 2294 Print this page List of Hinge Types Mounting information Operating Instruction for GN 2290 Plastic Characteristics

Product description

Information

Hinges GN 2294 are made of drawn profiled aluminum and are used on doors and covers, for example.

Given the external hinge leaf, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.

The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized thanks to the modular design and available accessories.

Specification

  • Aluminum
    Anodized, natural colorELEL
  • Bearing bushing / Cover cap
    • Plastic
      Technopolymer (Polyamide PA)
    • Graphite gray, RAL 7024
  • Tapered dowel pin ISO 8741
    Steel
    Zinc plated, blue passivated

RoHS

On request

  • Other lengths and hole spacings
  • Other finishes

Technical drawing

3D
GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements sketch
Hide technical drawing
GN 2294 Hinges, Detachable, for Aluminum Profiles / Panel Elements sketch

Article options / Table

Type

AExterior hinge leafs
IInterior hinge leafs

Coding

CWith countersunk holes
Show / Hide columns
l1
Type A
Type I		l2d1d2l3l4l5m1
Type A
Type I		m2m3m4s
7286826,61440364340,85542--3,5
72861626,61480364340,855-50323,5

Build & Price

Open 3D configurator
l1 (Type A)
l1 (Type I)
l2
Type


Coding

Finish
EL

Mounting information

Mounting Information 1

left / right hinges

Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge wing.
Montagehinweis 2

Mounting on door frames

For mounting a door that should be removable, two hinges of the same type must be attached to the door frame.

If the door is not supposed to be removable, the door must be mounted with at least one right hinge and at least one left hinge.
Mounting information 3

Mounting

  1. Position the bearing bushing with the desired installation direction on the hinge wing. Then insert a screw with a collar such as socket button head screws ISO 7380 into the bearing bushing to protect the bearing bushing collar from damage while pounding in.
  2. Pound in the bearing bushing until about 1 mm remains between the bearing bushing
    collar and the hinge wing.
  3. Remove the burr on the bearing bushing using a knife.
  4. Pound in the bearing bushing all the way.
  5. Remove the screw.
  6. Pound a tapered dowel pin into the bearing bushing.
  7. Place the cover cap on the opposite side of the hinge wing.

Insert the other bearing bushings according to points 1 to 5.

Selected Part (How to order)

Total (net)
13,03 €
plus VAT 2,48 €
gross 15,51 €
In stock
Weight: 0,062 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
76169990
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite
Recommend a product

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 2294-72-82-A-C-ELGN 2294-86-82-I-C-ELGN 2294-72-162-A-C-ELGN 2294-86-162-I-C-EL

This could also be interesting...

Hinges, Detachable, for Aluminum Profiles, with Guide Step
GN 2292 Hinges, Detachable, for Aluminum Profiles, with Guide Step
Hinges, for Aluminum Profiles / Panel Elements, Three-Part
GN 2295 Hinges, Aluminum, for Aluminum Profiles / Panel Elements, Three-Part
Hinges, for Aluminum Profiles / Panel Elements, Three-Part, Vertically Elongated Outer Leafs
GN 2295 Hinges, for Aluminum Profiles / Panel Elements, Three-Part, Vertically Elongated Outer Leafs
Hinge Leafs, for Aluminum Profiles / Panel Elements
GN 2291 Hinge Leafs, for Aluminum Profiles / Panel Elements
Bolt Sets, for Hinge Leafs GN 2291
GN 2290 Bolt Sets, for Hinge Leafs GN 2291
Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM:

+49 7723 6507-100 +49 7723 4659 info@ganternorm.com
Request Callback
An error has occurred!
We have received your callback request and will contact you soon.