Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
Stainless steel
Ball
Steel
RoHS
Smooth specification
(Ball seat with play)
Ball studs DIN 71803
Ball sockets DIN 71805
Axial joints
(ball socket and ball shank in one axis)
| B | With rivet ball shank, without safety catch |
| BS | With rivet ball shank, with safety catch |
| d1 H9/h9 | d2 | d2 Left hand thread | l2 | d4 h11 | d5 | d6 | l3 | l4 | t min. | A/F | min. pull-off force in N |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | M 5 | M 5L | 4 | 7,5 | 5 | 8 | 12,8 | 8,5 | 22 | 10,5 | 7 | 30 |
| 10 | M 6 | M 6L | 4,5 | 8 | 6 | 10 | 14,8 | 10,5 | 25 | 11,5 | 8 | 40 |
| 13 | M 8 | M 8L | 5 | 10 | 8 | 13 | 19,3 | 12 | 30 | 14 | 11 | 60 |
| 16 | M 10 | M 10L | 6 | 13 | 10 | 16 | 24 | 15 | 35 | 15,5 | 13 | 80 |
| 16 | M 12 | M 12L | 6 | 13 | 10 | 16 | 24 | 15 | 35 | 15,5 | 13 | 80 |
| 19 | M 14F | M 14FL | 12 | 18 | 14 | 22 | 30 | 19,5 | 45 | 21,5 | 16 | 100 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
