The cart is empty.

Ganter worldwide

Language Deutsch English Español Français Suomeksi Italiano

Deliver to

United States

Group Websites

Products

Service

Company

Search result: Linear actuator connector configured (limited to 100 hits from a total of 212) You are here: Product Overview > 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers > Linear Actuators, Linear Actuator Connectors > GN 292 Linear Actuators previous product next product

GN 292 Linear Actuators with Right and Left Hand Thread

Photo

GN 292 Linear Actuators, Steel / Stainless Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard sheet GN 292 Print this page Longitudinal scales GN 299 Technical Description / Load Data Operating instruction Stainless Steel Characteristics

Product description

Information

In addition to the standard stroke lengths specified in the above table for linear actuators GN 292 any stroke inside the maximum stroke length is available.

Besides the extensive range of tube clamp connectors there are a number of different components for fixing the linear actuators and to build linear actuator connectors.

In order to measure the displacement and positioning of the linear actuator connectors, digital as well as analogue position indicators can be installed and furthermore the guide tube can be provided with a longitudinal scale.

Specification

Guide tube

Tube DIN 2391
Steel, chrome-platedSCR
Tube DIN 2462
Stainless steel*NI AISI 304

Spindle with trapezoidal thread

Steel respectively
Stainless steel AISI 303
Ball bearing

Lead nut
Gunmetal

End plug
Plastic

RoHS

On request

Special lengths

Technical drawing

GN 292 Linear Actuators, Steel / Stainless Steel sketch

Hide technical drawing

GN 292 Linear Actuators, Steel / Stainless Steel sketch

Article options / Table

Type

RL1	Shaft journal at one end
RL2	Shaft journal at both ends

Show / Hide columns

d₁	l₁ Stroke (standard lengths)		max. stroke every	Threaded spindle	d₂	d₃	l₂ Total length	l₃	l₄	m₁	m₂	for parallel key DIN 6885

18	120*	-	167	TR10x3	6	M 3	2xl1+171	70	16	17	24	A2x2x12
30	130*	-	601	TR14x4	8	M 4	2xl1+253	102,5	16	23	38	A2x2x12
40	205*	255*	753	TR20x4	12	M 5	2xl1+299	117,5	17	42	54	A4x4x12
50	300*	350*	748	TR20x4	12	M 6	2xl1+309	120	18	42	54	A4x4x12
60	300*	-	715	TR24x5	14	M 8	2xl1+375	142,5	19	58	70	A5x5x16

* usually not available from stock

Build & Price

Open 3D configurator

Technical Description

Load data

Show / Hide columns

Ø Linear actuator	Fx in N	Fy in N l = 500	l = 1000	l = 1500	Mx in Nm	My in Nm	Mz in Nm

18	400	80	-	-	1,5	4,5	4,5
30	850	500	70	15	6,5	15	15
40	1100	2150	250	65	15	42	42
50	1750	3100	650	150	29	69	69
60	2600	4550	1500	400	45	125	125

Show / Hide columns

Ø Linear actuator	Fz in N l = 500	l = 1000	l = 1500	Mx in Nm	My in Nm	Mz in Nm

18	65	-	-	1,5	4,5	4,5
30	550	55	10	6,5	15	15
40	1900	150	50	15	42	42
50	3100	650	150	29	69	69
60	4550	1400	350	45	125	125

The load data are applicable to linear actuators GN 291, GN 292, GN 293 made of steel (SCR) or stainless steel (NI).

The specified forces Fy and Fz cause a flexure of the guide tube of approx. 0.5 mm.

Description

A lead nut moves in axial direction over the ball bearing trapezoidal thread spindle of the linear actuator. The follower ensures the anti-rotation and makes the link to the different linear actuator connectors. The linear actuators have been designed for manual operation (handwheel).

The positioning accuracy is 0.2 mm / 300 mm stroke, the maximum reverse play is 0.1 mm.

Guide tubes are available in chromed steel (SCR) or stainless steel (NI) non-rusting. They are made with the tolerance range of precision steel tubes DIN 2391 or DIN 2462.

A wide variety of different components are available in the tube clamp connector program to fix the linear actuators in place and to upgrade these into linear actuator connectors.

Also, digital position indicators (Position Indicators GN 953 / Position Indicators GN 954 / Position Indicators GN 9053 / Position Indicators GN 9054) may be attached to measure the displacement or the positioning.

In applications where high torsion forces Mx occur, linear actuators with square tubing or double tube linear actuators should be given preference.

A wide variety of different components from the tube clamp connector program is also available for the square tubings. The linear actuator connectors are composed of two-part elements, with the effect that the precision of the square tubes involves no special requirements.

Longitudinal Scales GN 299

for Standard Stroke Lengths l₁ of the Linear Actuators GN 291

MD299_NG-21265-0

299

Show / Hide columns

Ø Linear actuator	l₁ Stroke (Standard lengths)	l₂	l₃	z Scale length respectively highest figure

18	65	82,5	147,5	90
18	165	82,5	247,5	190
18	265	82,5	347,5	290
30	100	122,5	222,5	120
30	150	122,5	272,5	120
30	200	122,5	322,5	220
30	300	122,5	422,5	320
40	70	142,5	217,5	90
40	170	142,5	317,5	190
40	220	142,5	367,5	240
40	270	142,5	417,5	290
40	320	142,5	467,5	340
50	65	147,5	217,5	90
50	115	147,5	267,5	190
50	215	147,5	367,5	240
50	265	147,5	417,5	290
50	315	147,5	467,5	340
60	220	182,5	402,5	240
60	720	182,5	902,5	740

Specification

Scale engraved with laser precision

Information
The longitudinal scales GN 299 of type A and B are normally used in connection with the linear actuators Linear Actuators GN 291 and Square Linear Actuators GN 291.1, the scales of type C and D are normally used for the linear actuators Linear Actuators GN 292 and Linear Actuators GN 293.

Longitudinal scales can only be ordered togehter with linear actuators.

299bestellbeispiel

Selected Part (How to order)

Part number

Total (net)

401,24 €

plus VAT 76,24 €
gross 477,48 €

In stock

Weight: 0,440 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

84879059

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

About CAD-Downloads

Save as favourite

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

This could also be interesting...

Linear Actuators, Steel / Stainless Steel

GN 291 Linear Actuators, with Right or Left Hand Thread

Handwheels, Aluminum, Powder Coated, for Linear Actuators

NEW GN 9234 Handwheels, Aluminum, Powder Coated, for Linear Actuators

Linear Actuators, Steel / Stainless Steel

GN 293 Linear Actuators, with 2 Separate Threaded Spindles

Installation Kits for Position Indicators

GN 295 Installation Kits, for Position Indicators Used on Linear Actuators GN 291, GN 292, GN 293, GN 391

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

+49 7723 6507-100 +49 7723 4659 info@ganternorm.com

Request Callback