AN | On the chamfer, above |
AR | On the chamfer, below |
FN | In the front, above |
FR | In the front, below |
R | Digits ascending clockwise |
L | Digits ascending anti-clockwise |
Counter Indication after one spindle revolution | Indication after one spindle revolution | Indication after one spindle revolution | Indication after one spindle revolution | corresponds to thread pitch | max. revolutions per minute |
---|---|---|---|---|---|
0010 | 001.0 | 00.10 | 0.010 | 1 | 1500 |
00125 | 001.25 | 00.125 | 0.0125 | 1,25 | 1500 |
0015 | 001.5 | 00.15 | 0.015 | 1,5 | 1500 |
0020 | 002.0 | 00.20 | 0.020 | 2 | 1250 |
0025 | 002.5 | 00.25 | 0.025 | 2,5 | 1000 |
0030* | 003.0* | 00.30 | 0.030 | 3 | 830 |
0040** | 004.0** | 00.40 | 0.040 | 4 | 625 |
0050 | 005.0 | 00.50 | 0.050 | 5 | 500 |
0060 | 006.0 | 00.60 | 0.060 | 6 | 415 |
0080 | 008.0 | 00.80 | 0.080 | 8 | 315 |
0100 | 010.0 | 01.00 | 0.100 | 10 | 250 |
When mounting the position indicator, an appropriately situated mounting hole is required for the torque support. |
If the position indicator is used with smaller shaft diameters, the hollow shaft diameter Ø 10 H7 can be reduced with adapter bushings GN 952.1. |
||||||||||
Clamping Plates GN 954.7 can be used to clamp spindles after adjustment to secure them against independent or accidental turning. |
If reduction is desired in addition to installation of a control knob, control knobs GN 957 are available, which combine both functions in a single element. |
||||||||||
The position indicator is equipped with a hollow shaft that is slid directly onto the spindle and is connected to the spindle by a grub screw. The spindle rotations are transmitted to a counter directly by a gearbox. For torque support, a pin of the housing projects into a hole made on the machine side, establishing the position relative to the mounting site. |
|||||||||||
The transmission ratio and counting direction of the counter are determined by the pitch of the adjusting spindle. The indicated value after one turn starting from the 0 position serves as a characteristic value. Decimal places are indicated in red. |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0