Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Latches GN 1150 are intended for use in hygienic areas and meet hygiene requirements on the operating side (front hygiene). The locking mechanism is protected by two seals. At the same time, the high surface quality (Ra < 0.8 µm) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.
The latches create a secure closure by rotating a maximum of 90°, which positions the latch arm in the locked position behind the frame. Slanted surfaces on the latch arm ensure smooth positioning. Latch arms are available with different bend angles to cover a latch arm distance A from 6 to 28 mm.
The mounting holes in the housing must be at a right angle, free of burrs and without a chamfer. This ensures that the sealing rings will function properly. Latches GN 1150 are supplied with loosely enclosed latch arm.
Lock housing
Stainless steel AISI 316L
Latch arm
Stainless steel
Sealing ring / O-ring
EPDME
Other parts
Stainless steel AISI 316L
All moving parts lubricated with FDA compliant special grease
Protection class IP 66
RoHS
| SW | With two spanner flats |
| FH | Operating side in Hygienic Design (front hygiene) |
| d1 | Latch arm distance A | b1 | b2 | d2 | k Min. | Max. | l1 +1 / -1 | l2 | l3 ≈ | s | A/F | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 22 | 7,5 | 13,5 | 19,5 | - | - | - | - | - | - | 12 | 7 | 9 | 1,5 | 5 | 24 | 12,6 | 21 | 8 | 9 |
| 30 | 6 | 10 | 14 | 18 | 20 | 22 | 24 | 26 | 28 | 19 | 10 | 13 | 1,5 | 6 | 45 | 15,3 | 29 | 10 | 13 |
|
For installation, set a bore diameter in the door, cover or hatch as shown in the outline drawing opposite. The lock housing is inserted into the installation bore from the front and secured from the back with the mounting nut. Then the latch bar is secured with the hexagon head screw. In series production, the required installation bore in the door leaf is usually created by punching or laser cutting.. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. The sheet metal punch GN 123 is also available for small series production and sheet steel with a thickness < 2 mm. |
|||||||||||
|
Construction note for d1 = 22 |
Construction note for d1 = 30 |
||||||||||
|
Bore distance |
|||||||||||
|
|
||||||||||
|
Installation bore for punching or lasering |
|||||||||||
|
|
||||||||||
|
Installation bore for drilling or milling |
|||||||||||
|
|
||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
