JW Winco

Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com

GN 5862 Load Hooks

Photo

GN 5862 Load Hooks

Product description

Information

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.

The rated load carrying capacity listed in the table is shown clearly on bearing case. It applies to the most unfavourable load application of the load types listed opposite.

Load hooks GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The operating instruction contains further guidelines and is included with every load hook (see also at www.ganternorm.com/en/service).

Specification

Hook
Steel 1.6540

  • High-tensile tempered
  • 100% electro magnetic tensile tested
  • Powder coated, pink

Safety catch
Steel 1.6541

  • Forged
  • High-tensile tempered
  • 100% electro magnetic tensile tested

Bearing case
Steel 1.6541

  • Forged
  • High-tensile tempered
  • 100% electro magnetic tensile tested
  • Zinc plated, blue passivated

Threaded stud
Steel, high-tensile tempered
Finish: Delta Tone


RoHS

On request

Other screw lengths l

Technical drawing

3D
Hide technical drawing
GN 5862 Load Hooks sketch

Article options / Table

Show / Hide columns
d1Length ld2eh1h2h3h4h5k1k2k3k4csTightening
torque
in Nm
Nominal
Load
in t
M 12184,840129116754149125325821836100.63
M 16247,4461661469749631673321052541301.50
M 20309,66121518712661782095421363055702.50
M 243612,1782632271507796261185216335701504.00
M 304515,69530426717493119301355718940852255.00
M 365419100359310208102137361616822748904108.00

Build & Price

Open 3D configurator
Thread d1
Length l

Load capacity

Method of
mounting

Drawing GN 581 Table Drawing GN 581 Table2 Drawing GN 581 Table3 Drawing GN 581 Table4 Drawing GN 581 Table5 Drawing GN 581 Table6 Drawing GN 581 Table7 Drawing GN 581 Table8

Number

1

1

2

2

2

2

2

3 and 4

3 and 4

3 and 4

Angles of
inclination

0° to 7°

90°

0° to 7°

90°

0° to 45°

45° to 60°

asymm.

0° to 45°

45° to 60°

asymm.

Factor

1

1

2

2

1,4

1

1

2,1

1,5

1

M 12

0.63 t

0.63 t

1.26 t

1.26 t

0.88 t

0.63 t

0.63 t

0.63 t

0.95 t

0.63 t

M 16

1.50 t

1.50 t

3.00 t

3.00 t

2.10 t

1.50 t

1.50 t

3.15 t

2.25 t

1.50 t

M 20

2.50 t

2.50 t

5.00 t

5.00 t

3.50 t

2.50 t

2.50 t

5.25 t

3.75 t

2.50 t

M 24

M 24

M 24

8.00 t

8.00 t

5.60 t

4.00 t

4.00 t

8.40 t

6.00 t

4.00 t

M 30

6.70 t

5.00 t

13.40 t

10.00 t

7.00 t

5.00 t

5.00 t

10.50 t

7.50 t

5.00 t

M 36

10.00 t

8.00 t

20.00 t

16.00 t

11.20 t

8.00 t

8.00 t

16.80 t

12.00 t

8.00 t

Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +200 °C, with a safety coefficient of 4 taken into account for all values.
The operating instruction contains further guidelines and is included with every load hook.
The load hooks GN 5862 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.
If permanently mounted in place, the load hooks must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load hooks are not suitable for permanent rotary movement under load exposure.

Drawing GN 5862

Selected Part (How to order)

Total (net)
156,70
plus VAT 29,77 €
gross 186,47 €
In stock
Weight: 0,400 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
73269094
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

This could also be interesting...

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.