Cart

The cart is empty.

Quote Request
English / United States
Current selection: English / United States
Ganter worldwide
Language Deutsch English Español Français Suomeksi Italiano
Deliver to
United States
Group Websites
Show all
You are here: Product Overview  >  3.5 Controlling, Venting, Sealing of Liquids and Gases  >  Oil Drain Valves  >  GN 880 Oil Drain Valves previous product

GN 880 Oil Drain Valves

Photo

GN 880 Oil Drain Valves Material: ST - Steel
Material: ST - Steel
GN 880 Oil Drain Valves Material: ST - Steel GN 880 Oil Drain Valves Material: MS - Brass
Standard sheet GN 880 Print this page Description of function Plastic Characteristics

Product description

Information

Oil drain valves GN 880 may be used for draining non-pressurised oil. As well conditionally as for vacuum drainage.

The flow volume (l/min.) depends on the viscosity of the medium, the filling quantity and the temperature. Guidance values available on request.

Other features are:

  • Easy and safe handling
  • Optimum flow rate
  • High pressure resistance (up to 100 bar)
  • High temperature resistance (-30 °C to +120 °C, short period up to 180 °C)
  • 100 % seal-tight tested

Specification

  • Valve body
    • SteelST
      Zinc plated, bue passivated
    • BrassMS
  • Valve plate
    • Brass
    • O-ring rubber FPM (Viton®)
  • Sealing disk DIN 7603 A
    Copper
  • Protective cap
    Plastic (Polyamid PA)
  • Retaining cable
    Stainless steel

RoHS

Accessory

Mounting Nuts GN 7430

On request

  • Other materials

Technical drawing

3D
GN 880 Oil Drain Valves sketch
Hide technical drawing
GN 880 Oil Drain Valves sketch

Article options / Table

Type

KWith plastic protective cap and retaining cable
Show / Hide columns
d1
Steel
Brass		d2d3
Connection thread
for GN 880.1		d4e ≈l1l2l3A/F
M 14 x 1,5G 1/4--20M22 x 1,52625,47,510,53122
M 16 x 1,5---22M22 x 1,52625,47,510,53122
-G 3/8--23M22 x 1,52625,47,510,53122
M 18 x 1,5---24M22 x 1,52625,48,510,53122
M 20 x 1,5---26M22 x 1,52631,28,510,53127
M 22 x 1,5---27M26 x 1,53031,28,5123227
-G 1/2--26M26 x 1,53031,28,5123227
--M 24 x 1,5-29M26 x 1,53034,79123230
--M 26 x 1,5G 3/432M26 x 1,530379123232
--M 30 x 1,5-36M26 x 1,53041,69123236
---G 139M26 x 1,53047,39123241

Build & Price

Open 3D configurator
Fine thread d1 (Steel)
Inch thread d1 (Steel)
Fine thread d1 (Brass)
Inch thread d1 (Brass)
Material


Type

Description of function

Description of function GN 880

After removing the protective cap secured against loss with a retaining cable, turn in the matching connector pieces GN 880.1.

When the connector is screwed in, the valve plate will open and the oil will empty through the hose into a pan.

Take off the connector after the oil has drained. The valve plate will be lowered and closes off the drainage outlet.

The container with the oil drain vale is ready for filling again.

Other benefits of the oil drain valves GN 880:

  • No risk of burns caused by hot oil
  • No dirt caused by uncontrolled oil drainage
  • Quick and easy

Selected Part (How to order)

Total (net)
16,26 €
plus VAT 3,09 €
gross 19,35 €
In stock
Weight: 0,054 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
84818073
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite
Recommend a product

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 880-G1/4-ST-KGN 880-M14x1,5-ST-KGN 880-M16x1,5-ST-KGN 880-G3/8-ST-KGN 880-M18x1,5-ST-KGN 880-M20x1,5-ST-KGN 880-M22x1,5-ST-KGN 880-G1/2-ST-KGN 880-M24x1,5-MS-KGN 880-M26x1,5-MS-KGN 880-G3/4-MS-KGN 880-M30x1,5-MS-KGN 880-G1-MS-K

This could also be interesting...

Mounting Nuts, Brass, for Hydraulic Components
GN 7430 Mounting Nuts, Brass, for Hydraulic Components
Mounting Nuts, Stainless Steel, for Hydraulic Components
GN 7430 Mounting Nuts, Stainless Steel, for Hydraulic Components
Connector Pieces, for Oil Drain Valves GN 880
GN 880.1 Connector Pieces, for Oil Drain Valves GN 880
Sealing Rings, for Threaded Plugs DIN 908 / DIN 910, Copper / Aluminum / Stainless Steel
NEW DIN 7603 Sealing Rings, for Threaded Plugs DIN 908 / DIN 910, Copper / Aluminum / Stainless Steel
Connector Pieces for Oil Drain Valves GN 880, with Drain Hose
GN 880.1 Connector Pieces , for Oil Drain Valves GN 880, with Drain Hose
Threaded Plugs with DIN-Drain Symbol, Sealing Overlying, Plastic, Red
GN 740 Threaded Plugs, Sealing Overlying, Plastic, Red / with DIN-Drain Symbol
Threaded Plugs with and without Symbols, Aluminum, Resistant up to 100 °C
GN 741 Threaded Plugs, Aluminum, Resistant up to 100 °C
Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM:

+49 7723 6507-100 +49 7723 4659 info@ganternorm.com
Request Callback
An error has occurred!
We have received your callback request and will contact you soon.