Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Flanged linear actuator connectors GN 146.1 are based on flanged connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation G are equipped with sleeve bearings.
With the screw location z, the play of the guide bores d1 can be adjusted or the linear actuator connectors can be clamped after adjustment.
For quick clamping without tools, the socket cap screw can be replaced by the adjustable hand levers GN 911 listed in the table as accessories.
Aluminum
Powder coated
Black, RAL 9005, textured finishSW
Sleeve bearing
Plastic (PTFE)
Socket cap screws DIN 912
Stainless steel AISI 304
Hex nuts DIN 985
Stainless steel AISI 304
Self-locking via polyamide ring
RoHS
| 2 | With stainless steel socket cap srew DIN 912 |
| d1 **Bore **without''' sleeve bearing | with sleeve bearing | k Clamping length | d2 | d3 Mounting screws on the drive key | l1 | l2 | m | t | x1 | x2 | y1 | y2 | z Screw location | Accessory Recom. hand lever GN 911 for z l3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B 30 | G 30 | 40 | 6,5 | M 4 | 62 | 40 | 30 | 7 | 52 | 35 | 70 | 53 | M8-25 | 63 | 78 |
| B 30 | G 30 | 56 | 8,5 | M 4 | 83 | 56 | 42 | 10 | 78 | 52 | 108 | 82 | M10-35 | - |
| B 40 | G 40 | 56 | 8,5 | M 5 | 83 | 56 | 42 | 10 | 78 | 52 | 108 | 82 | M10-35 | 78 | 92 |
| B 40 | G 40 | 65 | 11 | M 5 | 95 | 65 | 50 | 14 | 92 | 62 | 128 | 98 | M10-50 | - |
| B 50 | G 50 | 65 | 11 | M 6 | 95 | 65 | 50 | 14 | 92 | 62 | 128 | 98 | M10-50 | 78 | 92 |
| B 60 | G 60 | 80 | 11 | M 8 | 112 | 80 | 60 | 14 | 110 | 74 | 154 | 118 | M10-50 | 78 | 92 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
