The cart is empty.

GN 350.5 Stainless Steel Leveling Sets with Spherical Washer, with Locknut

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard sheet GN 350.5 Print this page Stainless Steel Characteristics

Product description

Stainless steel leveling sets GN 350.5 are used for leveling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.

They comprise a threaded upper sleeve and an internal threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.

Specification

Stainless steelNI AISI 303
(X 10 CrNiS 18-9)

F₁: max.total load
F₂: max. load after deduction
of the max. preload
for screws 6.8, µ = 0,14

RoHS

Accessory

C-Spanner DIN 1810 (Code no. see table)

GN 350.5 Stainless Steel Leveling Sets with Spherical Washer, with Locknut sketch

Hide technical drawing

Article options / Table

Show / Hide columns

d₁	d₂	h₁ Version Low	High	d₃	h₂ Version Low	High	h₃ Adjustable range Version Low	High	for screw	Static load F in kN F₁	F₂	C-Spanner

25	6,6	27	40	M 15 x 1	31	50	4	10	M 6	27,1	20,26	DIN 1810-A25-28
32	6,6	32	49	M 20 x 1	37	63	5	14	M 6	43,4	36,56	DIN 1810-A30-32
32	9	32	49	M 20 x 1	37	63	5	14	M 8	43,4	30,86	DIN 1810-A30-32
32	11	32	49	M 20 x 1	37	63	5	14	M 10	43,4	23,41	DIN 1810-A30-32
45	11	41	61	M 30 x 1,5	48	79	7	18	M 10	84	64,01	DIN 1810-A45-50
45	13,5	41	61	M 30 x 1,5	48	79	7	18	M 12	84	54,82	DIN 1810-A45-50
45	17,5	41	61	M 30 x 1,5	48	79	7	18	M 16	84	28,9	DIN 1810-A45-50
58	17,5	53	79	M 40 x 1,5	62	102	9	23	M 16	148	92,9	DIN 1810-A58-62
58	22	53	79	M 40 x 1,5	62	102	9	23	M 20	148	59,08	DIN 1810-A58-62
58	26	53	79	M 40 x 1,5	62	102	9	23	M 24	148	20,3	DIN 1810-A58-62
70	22	61	94	M 50 x 1,5	71	123	10	29	M 20	225	136,08	DIN 1810-A68-75
70	26	61	94	M 50 x 1,5	71	123	10	29	M 24	225	97,3	DIN 1810-A68-75
70	33	61	94	M 50 x 1,5	71	123	10	29	M 30	225	20,6	DIN 1810-A68-75
80	26	67	105	M 60 x 2	79	144	12	39	M 24	323	195,3	DIN 1810-A80-90
80	33	67	105	M 60 x 2	79	144	12	39	M 30	323	118,6	DIN 1810-A80-90
80	39	67	105	M 60 x 2	79	144	12	39	M 36	323	38,2	DIN 1810-A80-90