Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
With spring latches GN 722.2, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to be held in place if the plunger pin needs to be kept temporarily from protruding. The A4 stainless steel version is suitable for use in particularly aggressive environments.
The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.
The hexagonal mounting holes allow the use of socket cap screws DIN 912 and hex screws or nuts according to DIN 931 or DIN 934.
Guide
Stainless steel precision castingA4 AISI 316
Latch
Stainless steel precision castingA4 AISI 316
Plunger pin
Stainless steel AISI 316
Pressure spring
Stainless steel AISI 316 Ti
RoHS
| A | Latch position right-angled to mounting holes |
| B | Latch position parallel to mounting holes |
| d1 Pin -0,05/-0,25 Bore +0,1/+0,3 | s | d2 +0,2 | h1 | h2 | l1 ≈ | l2 | l3 | l4 | l5 | m | A/F | Spring load in N ≈ initial | end |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 10 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 12 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 14 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 16 | 30 | 10,1 | 15 | 5 | 83 | 20 | 54 | 55 | 80 | 55 | 17 | 22 | 70 |
| 20 | 30 | 10,1 | 15 | 5 | 83 | 20 | 54 | 55 | 80 | 55 | 17 | 22 | 70 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
