Hinges GN 2292

GN 2292 Hinges, Detachable, for Aluminum Profiles, with Guide Step Type: A - Exterior hinge leafs
Identification no.: C - With countersunk holes
l<sub>2</sub>: 82

Type: A - Exterior hinge leafs
Identification no.: C - With countersunk holes
l₂: 82

Accessories for profile systems

Standard Parts in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show all compatible products

Standard sheet GN 2292 Print this page List of Hinge Types Mounting information Operating Instruction for GN 2290 Plastic Characteristics

Product description

Hinges GN 2292 are made of drawn profiled aluminum and are used on doors and covers, for example. The guide step allows them to be quickly and easily mounted to all commercially available profile systems with a nominal size of 40 mm and groove width “n”.

Given the external hinge leaf, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.

The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized thanks to the modular design and available accessories.

Specification

Aluminum
Anodized, natural colorEL

Bearing bushing / Cover cap
- Plastic
  Technopolymer (Polyamide PA)
- Graphite gray, RAL 7024

Tapered dowel pin ISO 8741
Steel
Zinc plated, blue passivated

RoHS

On request

Other lengths and hole spacings
Other finishes

l₁ Type A	Type I	l₂	d₁	d₂	l₃	l₄	l₅	m₁ Type A	Type I	m₂	m₃	m₄	n -0,3	s₁	s₂

72	86	82	6,6	14	40	36	43	40,8	55	42	-	-	8	3,5	6,5
72	86	162	6,6	14	80	36	43	40,8	55	-	50	32	8	3,5	6,5

GN 2292 Hinges Detachable, for Aluminum Profiles, with Guide Step

Accessories for profile systems

Product description

Specification

On request

Article options / Table

Type

Coding

Build & Price

Mounting information

Selected Part (How to order)

CAD data

CAD data

Login

Quick-Login

Do you find your product ?

This could also be interesting...

recently clicked


							left / right hinges Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge wing.
							Mounting on door frames For mounting a door that should be removable, two hinges of the same type must be attached to the door frame. If the door is not supposed to be removable, the door must be mounted with at least one right hinge and at least one left hinge.
							Mounting Position the bearing bushing with the desired installation direction on the hinge wing. Then insert a screw with a collar such as socket button head screws ISO 7380 into the bearing bushing to protect the bearing bushing collar from damage while pounding in. Pound in the bearing bushing until about 1 mm remains between the bearing bushing collar and the hinge wing. Remove the burr on the bearing bushing using a knife. Pound in the bearing bushing all the way. Remove the screw. Pound a tapered dowel pin into the bearing bushing. Place the cover cap on the opposite side of the hinge wing. Insert the other bearing bushings according to points 1 to 5.