Standard sheet GN 808.3
Print this page
Mounting information
Permissible r.p.m. and torque / Determining the size
Keyway JS9 DIN 6885, Page 1
Cross holes GN 110.1
ISO Fundamental Tolerances
Product description
Universal joint shafts with needle bearing GN 808.3 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EW) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.
Specification
- Steel
Plain
- Joint bearing areas, pins
Case-hardened
RoHS
On request
- Different lengths l1 - l2
- Bores without keyway
- Bores with square
- Bores with hexagon
- With other or unequal bores
- Version in stainless steel
(Needle bearing not rustproof)
