Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com

You are here: Product Overview > 1.3 Adjusting with Handwheels and Cranks > Cranked Handles with Retractable Handle > GN 471.3 Cranked Handles with Retractable Handle next product

GN 471.3 Cranked Handles with Retractable Handle Aluminum

Photo

Bore code: B - Bore

GN 471.3 Cranked Handles with Retractable Handle, Aluminum Bore code: V - With square

Standard sheet GN 471.3 Print this page Cross holes GN 110 Squares DIN 79 ISO Fundamental Tolerances

Product description

Information

The handle of the cranked handles with retractable handle GN 471. 3 is locked in a tapered bore in the operating position.

For tilting, the handle must first be pulled out of the taper in axial direction.

A pressure spring holds the handle in both end positions. When folded out, it automatically re-engages.

Specification

Body
Aluminum

Powder coated
Black, textured finish
Contact face of hub machined

Retractable Handle GN 598.3
Plastic, phenolic resin (PF)

Black, shiny finish
Retractable Mechanism
Steel, blackened

RoHS

On request

with Retractable Handle GN 598.5
(Retractable Mechanism Brass)

Technical drawing

GN 471.3 Cranked Handles with Retractable Handle, Aluminum sketch

Hide technical drawing

Article options / Table

Show / Hide columns

Length l	d₁ H7 Bore	s	d₂	d₃	h₁	h₂	h₃	h₄	h₅ ≈	Ø Handle GN 598

100	B 12	V 12	27	30	28	17	13	19,5	67,5	23
125	B 14	V 14	32	35	34	22	14	19,5	67,5	23
160	B 17	V 17	35	39	38	26	16	19,5	82,5	26

Build & Price

Open 3D configurator

GN 110 Cross holes (special order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11	d₃	Length l Standard version	Length l Handwheels DIN 950 / GN 949 to Ø 250

6	7	2,5	M 3	4,5	-
8	9	3	M 5	5,5	4,5
10	11	3	M 5	5,5	4,5
12	13	4	M 6	6,5	5,5
14	15	4	M 6	6,5	5,5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft consists very often of a cross pin or a grub screw.
As a result the user is faced with relatively high costs since cross holes on operating elements are in general not readily available.
Components with cross holes to GN 110 are not only offered at very competitive prices but they also save the manufacturer unnecessary drawing work. The geometrical form of some of the operating elements, however, does not lend itself to modification to this particular standard.
The pin hole d₂ H11 is drilled to suit drive spring pins.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-160-B14-A with cross hole GN 110-QE

Selected Part (How to order)

Part number

Total (net)

29,01 €

plus VAT 5,51 €
gross 34,52 €

In stock

incl. material surcharge: 0,12 €

The material surcharge is already included in the price.

Weight: 0,160 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

84879090

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.