The cart is empty.

GN 524 Disk Handwheels Plastic, Bushing Steel

GN 524 Disk Handwheels, Plastic Type: D - With revolving handle

ELESA original design
code: VDT.

Type: D - With revolving handle

Standard sheet GN 524 Print this page Keyways DIN 6885-1 Cross holes GN 110 ISO Fundamental Tolerances Plastic Characteristics

Product description

Disk handwheels GN 524 are renowned in particular for their design and the matte passivated aluminum ring.

The cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end. The cover is inserted by pushing it on by hand. To remove it run a finger with little pressure along the edge of the cap.

Specification

Plastic
Technopolymer (Polyamide PA)

Glass fiber reinforced
Temperature resistant up to 100 °C
Black, matte finish

Hub bushing
Steel, blackened

Threaded bushing
Brass

Cover plastic
Black, matte finish

Revolving handles

Plastic, Technopolymer
Black, matte finish
Spindle steel
Zinc plated, blue passivated

RoHS

Hide technical drawing

Article options / Table

Borde code

B	Without keyway
K	With keyway

Type

A	Without handle
D	With revolving handle

Show / Hide columns

d₁	d₂ H7 Bore	d₃	d₄	d₅	d₆	d₇	d₈	d₉	b	h	l₁ -0,5	l₂ -0,5	l₃	r	Ø Handle

100	10	22	20	25	27	35	54	32	22	5,5	22	49	60	37	18
125	12	26	24	29	31	44	70	37	25	7	27	58	65	47	22
160	14	35	33	37	39	55	90	46	27	11	28	64	80	62	24
200	20	40	38	48,5	50	66	110	51	30	9	31	67	90	78	25

Build & Price

GN 110 Cross holes (special order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11	d₃	Length l Standard version	Length l Handwheels DIN 950 / GN 949 to Ø 250

6	7	2,5	M 3	4,5	-
8	9	3	M 5	5,5	4,5
10	11	3	M 5	5,5	4,5
12	13	4	M 6	6,5	5,5
14	15	4	M 6	6,5	5,5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft consists very often of a cross pin or a grub screw.
As a result the user is faced with relatively high costs since cross holes on operating elements are in general not readily available.
Components with cross holes to GN 110 are not only offered at very competitive prices but they also save the manufacturer unnecessary drawing work. The geometrical form of some of the operating elements, however, does not lend itself to modification to this particular standard.
The pin hole d₂ H11 is drilled to suit drive spring pins.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-160-B14-A with cross hole GN 110-QE

Selected Part (How to order)

Part number

Total (net)

18,61 €

plus VAT 3,54 €
gross 22,15 €

In stock

ELESA Code: 170317

Description: VDT.100+i A-10

Weight: 0,185 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

84879090

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.