Hinges with Switch GN 239.4 (CFSQ,)

GN 239.4 Hinges with Switch, Plastic, with Connector Plug Identification: SL - Bores for contersunk screw, switch left
Type: AS - Connector plug at the top

Original design

code: CFSQ,

Identification: SL - Bores for contersunk screw, switch left
Type: AS - Connector plug at the top

Accessories for profile systems

Standard Parts in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show all compatible products

Standard sheet GN 239.4 Print this page List of Hinge Types IP Protection Classes Plastic Characteristics Stainless Steel Characteristics Operating instruction GN 239.4

Product description

Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the switching contact, allowing changes in the door status to be detected electrically depending on the wiring of the contacts (NC or NO).

The hinges with their integrated two-way switch are a compact, tamper-proof and easy to install unit, featuring an ultrasound-welded enclosure.

Operating instructions containing other important technical information are included with every hinge.

Specification

Hinge leaf
Plastic, Polyamide (PA-HP)

Glass fiber reinforced
Black, matte finish

Pin
Stainless steel AISI 303

RoHS

Accessory

Cables with Connector Coupling GN 330 (4-pole, 5 or 10 meters long)

GN 239.4 Hinges with Switch, Plastic, with Connector Plug sketch

Hide technical drawing

Article options / Table

Identification

SL	Bores for contersunk screw, switch left
SR	Bores for contersunk screw, switch right

Type

AS	Connector plug at the top
CS	Connector plug at the back

Show / Hide columns

l₁	l₂	h₁	h₂	h₃	h₄	l₃	l₄	l₅	m₁	m₂

70	53	16	8	16	14,5	110	51,5	22,5	45	34

Build & Price

Specifications

GN 239.4 Hinges with Switch, Plastic, with Connector Cable

GN 239.4 Hinges with Switch, Plastic, with Connector Plug

Width l₁

Length l₂

Identification

SL - Bores for contersunk screw, switch left

SR - Bores for contersunk screw, switch right

Type

AS - Connector plug at the top

CS - Connector plug at the back

Mechanical features

Maximal load

Information without safety factor

Load
direction

Examples of calculation
→ see Operating instruction

F max.

2100 N

2800 N

1300 N

Fixing

Types SL und SR with countersunk for countersunk screws e.g. DIN 7991

Recommended torque

5 Nm (Screws M6)

Protection type

IP67

acc. to EN 60529

Switching principle, contact opening

Changeover contact, with positive opening

acc. to IEC 60947-5-1

Contact material

Silver alloy Ag 90 Ni 10

Operating travel diagram
(scheme)

The switching points are fix at 6°. By reaching the lifespan, it can rise up to 9°.
→ see operating instruction

Maximum operating frequency

1200 operating cycles / hour

Mechanical life span

10⁶ operating cycles

acc. to IEC 60947-5-1

Actuating speed

min. 2° / second, max. 90° / second

Electrical and safety features

Utilization category

DC 13: 24 V DC / 4 A or 127 V DC / 0,3 A
AC 15: 220 V AC / 4 A or 440 V AC / 3 A

acc. to EN 60947-5-2
acc. to EN 60947-5-1

Contact termination
4-pole plug M12
or cable with 2 m or 5 m length
Pin and cable assignment

Type of cable

UL/CSA STYLE 2587 3X AWG 22

Short-circuit current

1000 A

Rated insulation voltage

250 V

Short-circuit protection

6 A, 500 V, Typ gl

Ambient temperature

20 °C ... + 80 °C

Degree of pollution, external

Mission time (T_M)

20 years

Number of cycles (B10 d)

2 000 000

Approvals, Conformities

Low-voltage switchgear and controlgear

CE declaration

EN 60947-1-5 : 2003 + A1/2009

Other important details and hints are given in the operating instructions for GN 239.4 hinges which are included with every hinge and which are also available as PDF downloads from Operating instructions.
The hinges with switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part (How to order)

Part number

Total (net)

95,82 €

plus VAT 18,21 €
gross 114,03 €

In stock

ELESA Code: 427013

Description: CFSQ.60-SH-6-C-A-S

Weight: 0,139 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

85369095

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.