Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Oil sight glasses GN 743.2 offer a sight glass of high stability and scratch proof. The seal is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
The sealing ring is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
Oil sight glasses GN 743.2 can also be used on pressurised tanks. Tests regarding maximum pressure are available.
Assembly instruction:
For mounting on walls of less than 4 mm thickness please use a mounting nuts GN 7430.
Body
Brass
CuZn40Pb2
Reflector
Technopolymer (Polysulfon)
Sight glass
Float glass
Temperature resistant up to 100 °C
Seals
Rubber NBR (Perbunan®)
RoHS
EPDM seal
| A | With reflector |
| B | Without reflector |
| d1 | d2 | d3 | l1 | l2 | s | ||
|---|---|---|---|---|---|---|---|
| 11 | G 3/8 | M 16 x 1,5 | - | 22 | 8 | 7,5 | 20 |
| 14 | G 1/2 | M 20 x 1,5 | - | 26 | 8,5 | 7,5 | 23 |
| 18 | G 3/4 | M 26 x 1,5 | M 27 x 1,5 | 32 | 9 | 8 | 30 |
| 24 | G 1 | M 33 x 1,5 | - | 40 | 11 | 8,5 | 36 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
