GN 7580 Precision Hinges Hinge Leaf Aluminum, Bearing Bushings Bronze, Used as Joint

Precision Hinges GN 7580: Hinge Leaf Aluminum, Bearing Bushings Bronze, Used as Joint
Finish: ALS - Anodized, black
Inner leaf type: A - Tangential fastening with cylindrical recess
Outer leaf type: A - Tangential fastening with cylindrical recess

Click on a variant image to view it in the main product display area or use tab keys to navigate through product variants

Product description

Precision hinges GN 7580 supply a pivoting movement to elements such as swing arms, spacers and clamping plates. The wear-resistant precision hinges feature low radial play and adjustable axial play.

A variety of installation situations can be covered by combining the various inner and outer leaves. Precise positioning can be achieved with dowel pins in the fit bores of the screw-on surfaces.

The bearing bushings and the tapped bushings of types B and D are supplied preassembled in the hinge leaves. The hinge pin, thrust washers and adjusting screws are packaged separately.

Specification

Hinge leafs
Aluminum
Anodized, blackALSALS


Bearing bushings
Bronze


Hinge pin
Stainless steel AISI 420


Thrust washers
Stainless steel AISI 302


Adjusting screws
Stainless steel AISI 303
With thread locking
Complete nylon coating


Tapped bushings
Stainless steel AISI 303


RoHS

Hide technical drawing
GN 7580 Precision Hinges, Hinge Leaf Aluminum, Bearing Bushings Bronze, Used as Joint sketch

Article options / Table

Inner leaf type

ATangential fastening with cylindrical recess
BTangential fastening with tapped bushings
CRadial fastening with cylindrical recess
DRadial fastening with tapped bushings

Outer leaf type

Show / Hide columns
l1l2bd1d2d3 H7h1h2m1m2m3m4m5m6t1t2
4050125,1M 5478,113,5203820204059
5570166,1M 651012,31827,556262656611
75100228,1M 861416,82537,580454580813

Build & Price

Finish
Anodized, black
Width l1
Length l2
Inner leaf type




Outer leaf type




Finish
Anodized, black
Width l1
Length l2
Inner leaf type




Outer leaf type




Assembly Instructions

11eec926-7a7a-4e9d-bcb6-eb35ef3b47a2

Load Capacity

Precision hinges GN 7580 have been subjected to extensive load tests. For these tests, the hinge leaves were positioned using dowel pins and screwed on with socket cap screws at the respective rated torque.

The values for FA, FR0 and FR90 were determined in compression tests with gradually increasing force and slow loading and unloading. The permissible load capacity was selected as the value after which a very low plastic deformation, irrelevant to the function, remained. The failure loads of the hinges are many times higher than the specified values.

249dc336-6241-4620-878c-f8b9accbb87c
Show / Hide columns
Code no.Radial load capacity
FR in N

FR90 in N
Axial load capacity
FA in N
GN 7580-ALS-40-55-*150015001250
GN 7580-ALS-55-70-*350035002000
GN 7580-ALS-75-100-*750075005000

The following table provides the values for the permissible torques. Applying these torque values together with the specified distance to the pivot point results in a reproducible elastic setting displacement.

Show / Hide columns
Code no.Permissible torque
M0 in Nm
Setting displacement
s
GN 7580-ALS-40-55-*200,3
GN 7580-ALS-55-70-*400,3
GN 7580-ALS-75-100-*1000,3
793d9a46-b6e7-4957-9c61-3a345f9dc6b5

The information on load capacity are non-binding guide values to the exclusion of any liability. In general, they do not constitute a warranty of quality. The user must determine whether a product is suitable for the intended use in each individual case. Environmental influences and aging may affect the specified values.

Selected Part (How to order)

Total (net)
60,04
plus VAT 11,41 €
gross 71,45 €
In stock
Weight: 0,066 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
83021000
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
Save as favourite
Recommend a product

Please enter the code you can find in the picture.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads

Do you find your product ?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 7580-ALS-40-50-A-AGN 7580-ALS-40-50-B-AGN 7580-ALS-40-50-C-AGN 7580-ALS-40-50-D-AGN 7580-ALS-40-50-A-BGN 7580-ALS-40-50-B-BGN 7580-ALS-40-50-C-BGN 7580-ALS-40-50-D-BGN 7580-ALS-40-50-A-CGN 7580-ALS-40-50-B-CGN 7580-ALS-40-50-C-CGN 7580-ALS-40-50-D-CGN 7580-ALS-40-50-A-DGN 7580-ALS-40-50-B-DGN 7580-ALS-40-50-C-DGN 7580-ALS-40-50-D-DGN 7580-ALS-55-70-A-AGN 7580-ALS-55-70-B-AGN 7580-ALS-55-70-C-AGN 7580-ALS-55-70-D-AGN 7580-ALS-55-70-A-BGN 7580-ALS-55-70-B-BGN 7580-ALS-55-70-C-BGN 7580-ALS-55-70-D-BGN 7580-ALS-55-70-A-CGN 7580-ALS-55-70-B-CGN 7580-ALS-55-70-C-CGN 7580-ALS-55-70-D-CGN 7580-ALS-55-70-A-DGN 7580-ALS-55-70-B-DGN 7580-ALS-55-70-C-DGN 7580-ALS-55-70-D-DGN 7580-ALS-75-100-A-AGN 7580-ALS-75-100-B-AGN 7580-ALS-75-100-C-AGN 7580-ALS-75-100-D-AGN 7580-ALS-75-100-A-BGN 7580-ALS-75-100-B-BGN 7580-ALS-75-100-C-BGN 7580-ALS-75-100-D-BGN 7580-ALS-75-100-A-CGN 7580-ALS-75-100-B-CGN 7580-ALS-75-100-C-CGN 7580-ALS-75-100-D-CGN 7580-ALS-75-100-A-DGN 7580-ALS-75-100-B-DGN 7580-ALS-75-100-C-DGN 7580-ALS-75-100-D-D

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM:

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.