Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com

You are here: Product Overview > 1.4 Adjusting, Positioning, Locking with and without Position Indication > Position Indicators Analog / Digital > GN 323.9 Disk Handwheels previous product next product

GN 323.9 Disk Handwheels for Position Indicators GN 000.9 / GN 000.13, Aluminum

Photo

Type: R - With revolving handle

GN 323.9 Disk Handwheels for Position Indicators Type: A - Without handle

Standard sheet GN 323.9 Print this page Installation sequence GN 322.9 Keyways P9 DIN 6885-1 Cross holes GN 110 ISO Fundamental Tolerances Plastic Characteristics

Product description

Information

Disk handwheels GN 323.9 have a recessed hub to accept position indicators GN 000.9 / GN 000.13.

The pallet pin is screwed in and held in position with the hexagon locknut.The length of the pallet pin l₅ can be adjusted as required.

Specification

Wheel body
Aluminum

Hub machined
Rim
- Turned on all sides
- Radial and axial runout IT12
Powder coated
Black, textured finish

Gear wheel
Plastic, Polyamide (PA)
Glass fiber reinforced

Screw for pallet pin
Steel blackened
injected

Revolving handle GN 798
Plastic, Polyamide (PA)

Black, matte finish
Spindle steel
Zinc plated, blue passivated

RoHS

Accessory

Position Indicators GN 000.9 (Retaining System, Analog Indication)
Position Indicators GN 000.13 (Retaining System, Digital / Analog Indication)
Countersunk Washers GN 184 (for Axial Fixing)

Technical drawing

GN 323.9 Disk Handwheels for Position Indicators sketch

Hide technical drawing

Article options / Table

Bore code:

B	Without keyway
K	With keyway DIN 6885-1 P9

Type

A	Without handle
R	With revolving handle

Show / Hide columns

d₁	d₂ H7 Bore	d₃	d₄	d₅	d₆	a	b	l₁	l₂ ≈	l₃	l₄	l₅	Ø Handle GN 798	for position indicators GN 000.9 Size	GN 000.13 Size

80	10	20	20,5	6	56	19	13	22,5	55	3,5	11,5	13,6	16	42	-
100	10	20	20,5	6	56	19	14	22,5	63,5	3,5	11,5	13,6	18	42	-
125	12	32	22,5	6	76	28,5	15	22,5	65,5	4	12	13,1	22	60	60
160	14	32	25,5	6	78	28,5	18	23,5	71,5	4	13	12,1	24	60	60

Build & Price

Open 3D configurator

Installation sequence

Turn spindle into the starting position (0-position).
Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel.
Move the position indicator to the 0 position by turning the outer gear wheel.
Hold the (unmounted) handwheel such that the hole for the gear pinion is in the “12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body.
Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step.

Secure the position indicator with the thumbscrew, avoiding excessive tightening torque to prevent the housing from deforming.

Place the hand knob onto the spindle and fix in place with the thumbscrew.
Check by turning the hand knob to ensure that the starting position of the spindle and the 0-position of both pointers coincide.

If necessary, take out and readjust the position indicator.

GN 110 Cross holes (special order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11	d₃	Length l Standard version	Length l Handwheels DIN 950 / GN 949 to Ø 250

6	7	2,5	M 3	4,5	-
8	9	3	M 5	5,5	4,5
10	11	3	M 5	5,5	4,5
12	13	4	M 6	6,5	5,5
14	15	4	M 6	6,5	5,5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft consists very often of a cross pin or a grub screw.
As a result the user is faced with relatively high costs since cross holes on operating elements are in general not readily available.
Components with cross holes to GN 110 are not only offered at very competitive prices but they also save the manufacturer unnecessary drawing work. The geometrical form of some of the operating elements, however, does not lend itself to modification to this particular standard.
The pin hole d₂ H11 is drilled to suit drive spring pins.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-160-B14-A with cross hole GN 110-QE

Selected Part (How to order)

Part number

Total (net)

48,44 €

plus VAT 9,20 €
gross 57,64 €

Ask for delivery time

incl. material surcharge: 0,49 €

The material surcharge is already included in the price.

Weight: 0,267 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

84879090

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.