Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
ELESA original design Torque limiting knurled knob screws GN 5910 are used when the manually applied torque is to be limited. The torque limit can be set between 0.2 Nm and 1 Nm.
When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When tightening, this will ensure that the maximum permissible torque is not exceeded. When turned counterclockwise, the mechanism locks such that the torque necessary for releasing is transferred.
Endurance tests have shown that the torque does not change even after up to 60,000 tightening cycles.
Plastic
Technopolymer (Polyamide PA)
Threaded stud
Steel, blackened
Color of the cover cap
Gray, RAL 7035
RoHS
| d1 | d3 | Length l | d4 | d5 | h1 | h2 | h3 | t | max. torque ±10% in Nm |
|---|---|---|---|---|---|---|---|---|---|
| 47 | M 6 | 30 | 9 | 39 | 44 | 15 | 0,3 | 10 | 1 |
| 47 | M 8 | 40 | 12 | 39 | 44 | 15 | 0,3 | 12 | 1 |
|
To adjust the torque, the cap of the torque limiting knob is removed to access the adjustment mechanism and to disengage the locking of the torque setting. |
|
||||||||||
|
The torque is set with the hexagon socket bolt in the center of the knob. The graduated dial moves in the axial direction, increasing or decreasing the torque limit. |
|
||||||||||
|
The set torque value is indicated on the graduated dial. Depending on the torque value, the slanted surfaces of the indicator window are level with the graduation marks of the graduated dial. After setting the torque, the cap must be reattached. This locks the torque setting and protects the adjusting mechanism from unauthorized access. |
|
||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
