Cart

The cart is empty.

Quote Request
English / United States
Current selection: English / United States
Ganter worldwide
Language Deutsch English Español Français Suomeksi Italiano
Deliver to
United States
Group Websites
Show all
You are here: Product Overview  >  2.4 Tensioning with Clamping Mechanisms  >  Toggle Clamps  >  GN 820.1 Stainless Steel Toggle Clamps previous product next product

GN 820.1 Stainless Steel Toggle Clamps Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base

Photo

GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base Material: NI - Stainless steel Type: P - Solid clamping arm, with clasp for welding
Material: NI - Stainless steel
Type: P - Solid clamping arm, with clasp for welding
GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base Material: NI - Stainless steel Type: P - Solid clamping arm, with clasp for welding GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base Material: NI - Stainless steel Type: N - Forked clamping arm, with two flanged washers GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base Material: NI - Stainless steel Type: NC - Forked clamping arm, with two flanged washers and clamping screw GN 708.1
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products
Standard sheet GN 820.1 Print this page General Information for Toggle Clamps Stainless Steel Characteristics

Product description

Information

Toggle clamps GN 820.1 work according to the toggle principle: lever and clamping bar move in the opposite direction.

They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position.

Toggle clamps in the U-bar version with two flanged washers (Type N) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for Type NC.

Toggle clamps in the type P version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component.

Specification

  • Stainless steelNI AISI 304
  • All moving parts
    Lubricated with special grease
  • Hand grip
    High quality, oil resistant red plastic
  • Clamping screw GN 708.1, type A
    • Stainless steel AISI 304
    • Rubber thrust pad 85 Shore A

RoHS

Accessory

Holders for Clamping Screws GN 801
Clamping Arm Extenders GN 801.1
Clamping Arm Extenders GN 801.2
Clamping Arm Extenders GN 809.1

Technical drawing

3D
GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base sketch
Hide technical drawing
GN 820.1 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Vertical Mounting Base sketch

Article options / Table

Type

NForked clamping arm, with two flanged washers
NCForked clamping arm, with two flanged washers and clamping screw GN 708.1
PSolid clamping arm, with clasp for welding
Show / Hide columns
SizeFH in N
Holding force		a ≈b1b2b3b4d1d2h1h2h3h4h5
759002028845,5M 54,545,527,5111912,5
130100032361056,5M 65,564441625,527,5
230170037441268,5M 86,57550183026
Show / Hide columns
Sizel1 ≈l2 ≈l3 ≈l4
max.		l5m1m2m3r ≈sw
75118684049,54513,53,5543415
13017092536455265,88,862517,5
23019610963,57868266,5973620

Build & Price

Open 3D configurator
Specifications

Size
Type



Material

Selected Part (How to order)

Total (net)
36,40 €
plus VAT 6,92 €
gross 43,32 €
In stock
incl. material surcharge: 0,65 €
The material surcharge is already included in the price.
Weight: 0,090 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
82057000
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite
Recommend a product

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 820.1-75-N-NIGN 820.1-75-NC-NIGN 820.1-75-P-NIGN 820.1-130-N-NIGN 820.1-130-NC-NIGN 820.1-130-P-NIGN 820.1-230-N-NIGN 820.1-230-NC-NIGN 820.1-230-P-NI

This could also be interesting...

Clamping Arm Extenders, Rigid, for Toggle Clamps with Forked Clamping Arm
GN 801.1 Clamping Arm Extenders, Steel, Rigid, for Toggle Clamps with Forked Clamping Arm
Clamping Arm Extenders, with Joint, for Toggle Clamps with Forked Clamping Arm
GN 801.2 Clamping Arm Extenders, with Joint, for Toggle Clamps with Forked Clamping Arm
Clamping Arm Extenders, for Toggle Clamps with Solid Clamping Arm
GN 809.1 Clamping Arm Extenders, for Toggle Clamps with Solid Clamping Arm
Holders for Clamping Screws, for Toggle Clamps
GN 801 Holders for Clamping Screws, for Toggle Clamps with Forked Clamping Arm, Steel, zinc plated
Clamping Screws, Stainless Steel, with Rubber Thrust Pad
GN 708.1 Clamping Screws, Stainless Steel, with Rubber Thrust Pad
Toggle Clamps, Steel, Operating Lever Horizontal, with Vertical Mounting Base
GN 820.1 Toggle Clamps, Steel, Operating Lever Horizontal, with Vertical Mounting Base
Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Horizontal Mounting Base
GN 820 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Horizontal Mounting Base
Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Side Mounting
GN 820.2 Toggle Clamps, Stainless Steel, Operating Lever Horizontal, with Side Mounting
Clamping Screws, Stainless Steel, with / without Protective Cap
GN 807 Clamping Screws, Stainless Steel, with / without Protective Cap
Clamping Screws, Stainless Steel, with Swivel Plastic Thrust Pad
GN 903 Clamping Screws, Stainless Steel, with Swivel Plastic Thrust Pad
Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM:

+49 7723 6507-100 +49 7723 4659 info@ganternorm.com
Request Callback
An error has occurred!
We have received your callback request and will contact you soon.