Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Assembly pins GN 2342 are characterized by their use in diverse applications.
Depending on the requirement there are three washer types to choose from, which place the assembly pin in an axial position in its insertion direction. With the washer with eyelet (Type E) the assembly pin and a corresponding GN 1024 spring cotter pin can be secured to prevent loss using a retaining cable or ball chain. The washer with mounting shackle (Type L) simultaneously acts as loss protection and anti-rotation protection.
Assembly pins according to identification no. 2 are secured against falling out via a transverse drill hole which is aligned to the GN 1024 spring cotter pin.
The technical annexe contains the load capacities for the double-sided shearing resistance (breaking strength).
Assembly pin
Stainless steelNI AISI 304
Washer
Stainless steel
Countersunk screw
RoHS
Spring Cotter Pins GN 1024
Ball Chains GN 111
Ball Chains GN 111.5 (Edelstahl)
Retaining Cables GN 111.2
Retaining Cables GN 111.2
Key Rings GN 111.3
| B | With plain washer |
| E | With washer with eyelet |
| L | With washer, with mounting shackle (only identification no. 1) |
| 1 | Without cross hole |
| 2 | With cross hole for spring cotter pin GN 1024 |
| d1 h9 | l1 | d2 | d3 | d4 | d5 | l2 | l3 | l4 | l5 | l6 | l7 | s1 | s2 | suitable key ring Ø for type E | suitable spring cotter pins for identification no. 2 |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 16 | 20 | 24 | 28 | 30 | 32 | 2,5 | 12 | 2,5 | 4,3 | 5,5 | 7 | 13,5 | 18 | 10 | 2 | 3 | 4 | 14 | - | - | GN 1024-NI-2-D |
| 8 | 35 | 40 | 45 | 50 | 55 | 60 | 2,5 | 12 | 2,5 | 4,3 | 5,5 | 7 | 13,5 | 18 | 10 | 2 | 3 | 4 | 14 | - | - | GN 1024-NI-2-D |
| 10 | 20 | 24 | 30 | 35 | 40 | 45 | 2,5 | 15 | 2,5 | 4,3 | 6 | 7 | 15 | 21 | 11 | 4 | 3 | 4 | 14 | - | - | GN 1024-NI-2-E / ...-D |
| 10 | 50 | 55 | 60 | 65 | 70 | 80 | 2,5 | 15 | 2,5 | 4,3 | 6 | 7 | 15 | 21 | 11 | 4 | 3 | 4 | 14 | - | - | GN 1024-NI-2-E / ...-D |
| 12 | 20 | 24 | 30 | 35 | 40 | 45 | 2,5 | 17 | 3 | 5,3 | 7 | 9 | 18,5 | 23 | 12 | 4 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-2-E / ...-D |
| 12 | 50 | 55 | 60 | 65 | 70 | 80 | 2,5 | 17 | 3 | 5,3 | 7 | 9 | 18,5 | 23 | 12 | 4 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-2-E / ...-D |
| 16 | 32 | 35 | 40 | 45 | 50 | 55 | 3,5 | 22 | 3 | 5,3 | 8 | 9 | 21 | 28 | 15 | 6 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-3-E / ...-D |
| 16 | 60 | 65 | 70 | 80 | 90 | 100 | 3,5 | 22 | 3 | 5,3 | 8 | 9 | 21 | 28 | 15 | 6 | 4 | 4,5 | 14 | 18 | - | GN 1024-NI-3-E / ...-D |
| 20 | 40 | 45 | 50 | 55 | 60 | 65 | 4,5 | 26 | 3,5 | 6,4 | 10,5 | 9 | 24 | 31 | 17 | 6 | 4 | 5 | 14 | 18 | 24 | GN 1024-NI-4-E / ...-D |
| 20 | 70 | 80 | 90 | 100 | - | - | 4,5 | 26 | 3,5 | 6,4 | 10,5 | 9 | 24 | 31 | 17 | 6 | 4 | 5 | 14 | 18 | 24 | GN 1024-NI-4-E / ...-D |
|
|
Information At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage. The values were arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values. An appropriate safety factor must be taken into account in the design. |
||||||||||||||||||||||||||
|
Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength) |
|||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
