Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
With the aid of serrated locking plates GN 187.4, standard components can be connected together at a defined angle with a positive connection.
The angle orientation of the teeth is adapted to the fastening holes, permitting a parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps, resulting in the indexing positions listed in the separate table.
The range of designs makes these plates adaptable for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs
GN 187.2 are useful additional standard parts.
RoHS
| A | With tapped hole d3 in the center, with two countersunk holes for cap screws |
| B | With Drilling d4 in the Center, with Two Countersunk Holes for Cap Ccrews |
| C | With tapped hole d3 in the center, with two tapped mounting holes |
| D | With Drilling d4 in the Center, with Two Tapped Mounting Holes |
| E | Without bores |
| d1 | z Tooth count | d2 | d3 | d4 | d5 | d6 | d7 | h1 ±0,09 middle of the teeth | h2 (2x h1) | m1 | m2 | w min. Stroke |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 22 | 48 | 60 | 15,5 | M 4 | 4,2 | 3,2 | M 3 | 3 | 6,5 | 13 | 12 | 12 | 0,6 |
| 27 | 48 | 60 | 19,5 | M 5 | 5,2 | 4,3 | M 4 | 4 | 7,5 | 15 | 15 | 15 | 0,7 |
| 32 | 48 | 60 | 23,5 | M 6 | 6,2 | 5,3 | M 5 | 5 | 9 | 18 | 18 | 18 | 0,9 |
| 40 | 48 | 60 | 30 | M 8 | 8,2 | 6,3 | M 6 | 6 | 11,5 | 23 | 23 | 23 | 1,3 |
|
z |
Angle |
Possible angles / index positions |
|||||||||
|
48 |
7,5° |
|
|||||||||
|
60 |
6° |
|
|||||||||
|
|||||||||||
|
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
