Hinges with Safety Switch GN 139.5

l₁	l₂	l₃	l₄	l₅	h₁	h₂	m₁	m₂	m₃	m₄

76	126	40	99,4	22	15,5	31,5	88	29	41	9

Mechanical features

Maximal load

Information with safety factor

Load
direction

Examples of calculation
→ see Operating instruction

F max.

2000 N

Fixing

from the back, 10 x threads M6, 8 mm deep

Recommended torque

10 Nm (Screws M6)

Protection type

IP67 / IP69K
(Mind the cable conduit!)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable up to 2° in direction of 0°.
→ see operating instruction

Maximum operating frequency

600 operating cycles / hour

acc. to IEC 60947-5-1

Mechanical life span

10⁶ operating cycles

Actuating speed

min. 2° / second, max. 90° / second

Electrical features / Safety features

Utilization category

AC 15: 24 Vac / 2A / DC 13: 24 Vdc / 2A (connector plug)
AC 15: 250 Vac / 3A / DC 13: 250 Vdc / 0,3 A (cable)

acc. to EN 60947-5-1

Contacts, termination
8-pole connector M12 or
9 wire cable with
2 m or 5 m length
Pin and cable assignment

Type of cable

9x0,34 mm², PVC H05VV-F, black

acc. to IEC 60332-1

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC (connector plug) / 250 Vac (cable)

Short-circuit protection

2 A, 500 V, Typ gG (connector plug) / 3 A, 500 V, Typ gG (cable)

Ambient temperature

25 °C up to + 80 °C

Degree of pollution, external

acc. to EN 60947-5-1

Safety parameters

B10: 1 000 000, B10 d: 5 000 000,
B10 / B10 d: 20%

acc. to EN ISO 13849-1

Approvals, Conformities, Applicability


Low-voltage switchgear and controlgear CE declaration EAC- and UL-certified		EN 60947-1/2007 EN 60947-1-5 : 2004 + A1/2009
Safety applications	until SIL 3 / PL e	acc. to EN ISO 13849-1
Other important details and hints are given in the operating instruction for GN 139.5 hinges which are included with every hinge and which are also available as PDF downloads from Operating instructions. The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part (How to order)

Part number

Total (net)

459,19 €

plus VAT 87,25 €
gross 546,44 €

In stock

Weight: 0,867 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

85369095

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.