The cart is empty.

GN 22882 Wheels Wheel Tread Polyurethane, Wheel Core Polyamide

Original design RE.FF

Bearing type: K - Ball bearing
Type: A - Wheel without bracket

Standard sheet GN 22882 Print this page General Notes and Overview of Types Operating Conditions and Technical Information Plastic Characteristics

Product description

Wheels GN 22882 are used in industrial and public indoor areas for moving transport carts, for example.

The wheel tread offers low rolling resistance and high elasticity as well as good wear and tearing resistance.

With bearing type K, the low wear on the ball bearing increases the service life, and the mounting to the inner ring can be accomplished with zero axial backlash.

Specification

Wheel tread
Thermoplastic polyurethane (TPU)

Injection molded
Orange
Hardness 55 Shore D

Wheel core
Plastic, polyamide (PA)

Operating temperature -15 °C to +80 °C

RoHS

GN 22882 Wheels, Wheel Tread Polyurethane, Wheel Core Polyamide sketch

Hide technical drawing

Article options / Table

Bearing type

G	Friction bearing
K	Ball bearing

Type

A	Wheel without bracket

Show / Hide columns

d₁ Wheel ø	b₁	b₂ Bearing type G	Bearing type K	d₂ Bearing type G	Bearing type K	Recommended ergonomic max. load in N Bearing type G	Bearing type K	Max. static load capacity in N	Max.  dynamic load capacity in N Bearing type G	Bearing type K

80	30	39	40	12	8	1200	1300	2200	1200	1300
100	30	44	45	12	8	1700	2000	3000	1700	2000
125	35	44	45	15	8	2300	2500	3500	2300	2500
150	45	59	60	20	12	2800	3000	7000	3500	3500
200	50	59	60	20	12	3200	3600	7500	4500	4500

Build & Price

Suitable for floor type

The type of the floor and the possible obstacles are factors that influence the amount of force required to move the cart as well as the transmission of vibrations and the wear on the wheel.
Based on the characteristics of the floor, the guidelines apply to selecting the right wheel:

For irregular floors and in the case of obstacles, the wheels should have soft and thick tread and large diameter.
For smooth floors and heavy loads, the wheels should have hard tread.

The following table shows the suitable floor type for each wheel in simplified form.

Show / Hide columns

Standard	Tiles	Asphalt	Cement-resin, concrete	Unpaved floor	Grate floor	Floor with chips	Floor with obstacles

GN 22870	x	-	-	-	-	-	x
GN 22872	x	-	x	-	-	-	-
GN 22873	x	x	x	x	x	x	x
GN 22874	x	x	x	x	x	x	x
GN 22875	x	x	x	x	x	x	x
GN 22880	x	-	x	-	-	-	x
GN 22882	x	-	x	-	-	-	-
GN 22884	x	-	x	-	-	-	x
GN 22885	x	-	x	-	-	-	-
GN 22886	x	x	x	x	x	x	x
GN 22887	x	-	x	-	-	-	-
GN 22892	x	-	x	-	-	-	-
GN 22894	x	-	x	-	-	-	-
GN 22868	x	-	x	-	-	-	-

Selected Part (How to order)

Part number

Total (net)

3,97 €

plus VAT 0,75 €
gross 4,72 €

In stock

ELESA Code: 451001

Description: RE.FF-080-RBL

Weight: 0,110 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

83022000

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.