Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Edge protection seal profiles GN 2180 can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherence to the guideline placement radii (r1... r4) is recommended in order to ensure a tight profile seal and to make assembly easier.
The NBR profiles are recommended for use in cases where contact with fuels, oils or coolants can occur.
EPDM profiles are certified according to UL 50 and UL 94-HB and are therefore approved for the US-American and the Canadian market.
Clamping profile / Sealing profile
Ethylene propylene diene rubberEPDM
Acrylonitrile butadiene rubberNBR
(only for sizes h1 = 20,5 and 13)
Clamp insert
Steel wire polyester clamping band
RoHS
| A | Upper seal profile |
| D | Side seal profile |
| h1 Type A | h1 Type D | Length l in meter | a Clamping area | b | h2 | h3 | h4 | k | r1 | r2 | r3 | r4 | w1 | w2 up to 50% permissible deformation |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 15,5 | - | 20 | 50 | 0.8 - 2.5 | 8,5 | 9 | - | - | - | 80 | 50 | 20 | - | 6,5 | 5 |
| 20,5 | - | 20 | 50 | 1 - 3.5 | 11 | 10,5 | - | - | - | 90 | 50 | 30 | - | 10 | 7 |
| - | 11,5 | 20 | 50 | 0.8 - 2.5 | 8,75 | 9 | 2,5 | 3,75 | 4 | 30 | 40 | 80 | 40 | 8,5 | 6,75 |
| - | 13 | 20 | 50 | 1 - 3.5 | 11 | 10,75 | 2,25 | 4,5 | 4,75 | 40 | 50 | 100 | 80 | 11,25 | 8,75 |
|
|
||||||||||
|
Application examples |
|||||||||||
|
|||||||||||
|
Construction example |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
