Product description
Telescopic linear slides GN 2410 consist of two linear motion ball slide rails connected at the runners. They are used, for example, in material handling or automation applications, or in jigmaking, to achieve a sliding motion in a linear direction when long extensions with low construction height of the rail are required.
The dual configuration has the advantage that both the radial and axial load capacities are identical. Meanwhile this design has proven less susceptible to dirt in practical use.
The rails and runner are equal in length. Both runners can be extended so that an extension is reached which is longer than the rail base length l1. Removing the support screws from the rails allows an extension of the rails on both sides.
External elements should limit the maximum sliding distance; the supports of the rail have been designed to guard against the inadvertent extraction of the runner from the rail.
Specification
Rail / Runner
Heat-treated steel
- Zinc plated, blue passivated
- Raceways hardened
Balls
Anti-friction bearing steel, hardened
Ball cage
Steel, zinc plated
Rail connection
Screw
Steel, zinc plated
RoHS
On request
Other lengths (based on the standard lengths grid dimension of 80 mm)
Special lengths (other bore, start and end distances)
