Telescopic Slides GN 1400

l₁	l₂ +2 / -2 Stroke	l₃	F_s per pair in N at 10,000 cycles	at 100,000 cycles

300	210	485	220	170
350	240	565	260	200
400	290	665	260	200
500	370	845	280	220

Fastening screws

For the said loading forces F_S to be absorbed reliably in the surrounding structure, all available through-holes of the outer and inner slide must be used. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting:

Designation - standard
Countersunk screw, Phillips DIN 965
Countersunk screw, Phillips DIN 7997

Outer slide
M 4
Size 3,5 / 4

Inner slide
M 4
Size 3,5

Information on load capacity


The maximum load capacity of telescopic slides depends on the slide profile, the nominal length l₁, and the resulting stroke l₂. Furthermore, the extension width, the slide materials used, and the parts of the component options, such as the dampened self-retracting mechanism, have a considerable influence. The information on the maximum load capacity of the telescopic slides was determined in fatigue tests under the following conditions:
Slide arrangement vertical in pairs Observance of all mounting information Warp-resistant test set-up Equal distribution of the load F_S throughout the extension finish Standard slide spacing of 450 mm 10,000, 50,000 or 100,000 test cycles (one extraction and retraction = one cycle) Gradual increasing of load
Wear, performance, and maximum bending were assessed after every test segment.

Selected Part (How to order)

Part number

Total (net)

19,52 €

plus VAT 3,71 €
gross 23,23 €

In stock

incl. material surcharge: 0,54 €

The material surcharge is already included in the price.

Weight: 0,380 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

83024200

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Pair

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.