Holding Disks GN 7080

Material (Sealing ring): E - EPDM

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

suitable for use in hygienically sensitive areas
quick and easy cleaning
no dead spaces due to functional seals
certified according to EHEDG guidelines

Show all Hygienic Design products

FDA compliant

Standard sheet GN 7080 Print this page Product Family Hygienic Design Plastic Characteristics

Product description

Holding disks GN 7080 are used as counterparts for retaining magnets when these are used in combination with non-magnetic materials or when the holding force needs to be increased due to thin material.

They are intended for use in hygiene areas. The sealed screw-on surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish prevents dirt from accumulating and facilitates cleaning.

The holding disks can also be used in particularly aggressive environments thanks to the material used.

Specification

Disk
Stainless steel AISI 318LN
Matte finish (Ra < 0.8 µm)MT

Sealing ring

H-NBRH
Operating temperature -25 °C to +150 °C
EPDME
Operating temperature -40 °C to +120 °C
FKMF
Operating temperature -5 °C to +200 °C
FDA compliant material
Blue
Hardness 85 ±5 Shore A

RoHS

Accessory

Sealing Rings GN 7600
Nuts GN 1580

d₁	d₂	d₃	d₄	h	Length l	s

28	M 4	26	24	10	5	24
42	M 5	40	38	11	5	38

d₁

d₂

d₃

d₄

Length l

M 4

M 5

GN 7080 Holding Disks Stainless Steel, with Threaded Stud, Hygienic Design

Product Family Stainless Steel

Product Family Hygienic Design

FDA compliant

Product description

Specification

Accessory

Article options / Table

Type

Build & Price

Assembly Instructions

Selected Part (How to order)

CAD data

CAD data

Login

Quick-Login

Do you find your product ?

This could also be interesting...



A normal holding force is achieved by combining retaining magnets with holding disks. Retaining magnets with north or south poles on the holding surface can be used equally.

If two retaining magnets with opposite polarity are combined, an increased holding force is achieved.

Combining two retaining magnets with the same polarity creates a repelling force.