Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com

You are here: Product Overview > 1.3 Adjusting with Handwheels and Cranks > Cranked Handles > GN 570.1 Cranked Handles previous product next product

GN 570.1 Cranked Handles Plastic

Photo

ELESA original design
code: MT-AS

Standard sheet GN 570.1 Print this page Cross holes GN 110 ISO Fundamental Tolerances Plastic Characteristics

Product description

Information

The protruding steel bushing of cranked handles GN 570.1 ensures an accurate bore and square to bore face. It can be retained with a pin or a retaining screw. The link between the cranked handle and shaft can be established either with a keyway or a follower pin.

Specification

Body
Plastic
Technopolymer (Polyamide PA)

Glass fiber reinforced
Temperature resistant up to 90 °C
Black, matte finish

Hub bushing
Steel, blackened

Threaded bushing to accept
the revolving handle
Brass

Revolving handles GN 598

Plastic, Technopolymer
Black, matte finish
Spindle steel
Zinc plated, blue passivated

Revolving Handles GN 598

RoHS

Technical drawing

GN 570.1 Cranked Handles, Plastic, with Square sketch

Hide technical drawing

Article options / Table

Show / Hide columns

Length l	s H9 Square	d₃	d₄	d₅	h₃	h₄	h₆	h₇	h₈ ≈	Ø Handle

50	V 6	13	23	-	18	21	10	11	28,5	14
64	V 8	16	27	18	19	23	10	13	42,5	18
80	V 10	17	30	20	22	26	13	13	52,5	21
100	V 12	21	34	25	27	30	15	16	67,5	23
130	V 14	25	40	28	30	35	20	16	82,5	26
160	V 17	27	45	30	34	40	23	18	92,5	28

Build & Price

Open 3D configurator

GN 110 Cross holes (special order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11	d₃	Length l Standard version	Length l Handwheels DIN 950 / GN 949 to Ø 250

6	7	2,5	M 3	4,5	-
8	9	3	M 5	5,5	4,5
10	11	3	M 5	5,5	4,5
12	13	4	M 6	6,5	5,5
14	15	4	M 6	6,5	5,5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft consists very often of a cross pin or a grub screw.
As a result the user is faced with relatively high costs since cross holes on operating elements are in general not readily available.
Components with cross holes to GN 110 are not only offered at very competitive prices but they also save the manufacturer unnecessary drawing work. The geometrical form of some of the operating elements, however, does not lend itself to modification to this particular standard.
The pin hole d₂ H11 is drilled to suit drive spring pins.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-160-B14-A with cross hole GN 110-QE

Selected Part (How to order)

Part number

Total (net)

8,33 €

plus VAT 1,58 €
gross 9,91 €

In stock

ELESA Code: 44052

Description: MT.50 AS 6X6

Weight: 0,035 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

84879090

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.