Lifting Eye Nuts (Rotating) GN 583

GN 583 Lifting Eye Nuts (Rotating), Steel

Standard sheet GN 583 Print this page Application and mounting information Operating instruction GN 583 Strength Values of Nuts

Product description

Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).

Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).

The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.

Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the lifting point, e.g. during the prescribed regular inspection.

The hexagon socket nut cannot be removed from the ring.

The operating instruction contains further guidelines and is included with every lifting eye nut (see also at www.ganternorm.com/en/service).

Specification

Ring
Steel
German Material No. 1.6541

Forged
High-tensile tempered
100% electro magnetic tensile test to EN1677
Powder coated, pink

Nut
Steel
Property class 10

RoHS

GN 583 Lifting Eye Nuts (Rotating), Steel sketch

Hide technical drawing

Article options / Table

Show / Hide columns

d₁	d₂	d₃	d₄	d₅	h	k₁	k₂	Length l	A/F	Nominal Load (WLL)

M 8	16	25	28	25	45	8,5	47	14	12	0.30 t [3.0 kN]
M 10	16	25	28	25	45	8,5	47	14	12	0.40 t [4.0 kN]
M 12	20	30	34	30	55	10	56	17	14	0.75 t [7.5 kN]
M 16	22	35,5	40	35	66	14	65	21	19	1.50 t [15.0 kN]
M 20	29	40	50	40	74	16	75	23	24	2.30 t [23.0 kN]
M 24	35	50	60	48	90	19	90	29	30	3.20 t [32.0 kN]
M 30	44	60	75	60	112	24	112	34	36	4.50 t [45.0 kN]

Build & Price

Load capacity

Method of mounting

Number

3 and 4

Angles of
inclination

0°

90°

0°

90°

0° to 45°

45° to 60°

asymm.

0°
to
45°

45° to 60°

asymm.

Factor

1,4

2,1

1,5

M 8

1,00 t [0,14 t]

0,30 t

2,00 [0,28]

0,60 t

0,42 [0,10]

0,30 t

0,63 t

0,45 t

0,30 t

M 10

1,00 t [0,23 t]

0,40 t

2,00 [0,46]

0,80 t

0,56 [0,17]

0,40 t

0,84 t

0,60 t

0,40 t

M 12

2,00 t [0,34 t]

0,75 t

4,00 [0,68]

1,50 t

1,00 [0,24]

0,75 t

1,60 t

1,12 t

0,75 t

M 16

4,00 t [0,70 t]

1,50 t

8,00 [1,40]

3,00 t

2,10 [0,50]

1,50 t

3,15 t

2,24 t

1,50 t

M 20

6,00 t [1,20 t]

2,30 t

12,00 [2,40]

4,60 t

3,22 [0,86]

2,30 t

4,83 t

3,45 t

2.30 t

M 24

8,00 t [1,80 t]

3,20 t

16,00 [3,60]

6,40 t

4,48 [1,29]

3,20 t

6,70 t

4,80 t

3,20 t

M 30

12,00 t [3,20 t]

4,50 t

24,00 [6,40]

9,00 t

6,30 [2,30]

4,50 t

9,40 t

6,70 t

4,50 t

Safety instructions

The loads given in brackets refer to the load capacity of the corresponding Lifting Eye Nuts DIN 582. If such a value is not indicated the use of the lifting eye nuts DIN 582 is not permitted!
The bolt-on surface for the lifting eye nuts GN 583 must be plane and at a right angle to the threaded borehole. Screwed in, the collar of the nut must make firm contact (do not use washers) and the eye nut must rotate freely by 360°.
Before applying the load, turn the lifting eye nutt in the direction of the force. The lifting eye nut is not suitable for frequent rotation cycles under load.
The specified load values apply only in connection with threaded bolts of steel grade > 10.9 if the bolt is turned in over its entire length l. These load values also apply only for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of – 40 °C to + 100 °C.
Load-bearing capacity under different conditions upon request.
The Operating instructions contains further guidelines and is included with every lifting eye nut.

Selected Part (How to order)

Part number

Total (net)

62,27 €

plus VAT 11,83 €
gross 74,10 €

In stock

Weight: 0,105 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

73269098

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.