Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
With side clamps GN 9190.1, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against fixed stops and the supporting surface.
The clamping stroke of the clamping jaw results from the screw-in depth of the clamping thread d4. When the set screw is released, the clamping jaw is returned by spring force. The low overall height of the side clamps allow full-surface machining of the workpiece.
Side clamps can be screwed in directly, e.g. in a mounting plate, or fastened to machine tables with T-slots. In addition, they can be mounted in any position perpendicular to the T-slot using the slotted support blocks GN 9190.3, which are available as accessory.
Clamping mechanisms
Steel
Nut for T-slot
Socket cap screw DIN 912
Ball point screw (coding G)
Adjustable hand lever (coding K)
RoHS
| E | With serrated clamping jaw |
| P | With prism clamping jaw |
| G | Clamping stroke with ball point screw |
| K | Clamping stroke with adjustable hand lever |
| a Slot width | d1 | FS in kN Max. clamping force | b | d2 | d3 Min. | Max. | d4 | h1 |
|---|---|---|---|---|---|---|---|---|
| 10 | M 8 | 7 | 32 | 8,4 | 4 | 26 | M 8 | 24 |
| 14 | M 12 | 15 | 48 | 12,5 | 4 | 26 | M 12 | 37 |
| 18 | M 16 | 21,5 | 68 | 16,5 | 4 | 26 | M 16 | 47 |
| a Slot width | h2 | h3 | l1 | l2 | l3 | l4 | s Clamping stroke | Max. tightening torque MA in Nm |
|---|---|---|---|---|---|---|---|---|
| 10 | 20 | 8 | 52 | 28 | 30 | 63 | 3 | 3 |
| 14 | 30 | 11 | 72 | 40 | 44 | 78 | 4 | 9 |
| 18 | 35 | 13 | 86 | 41 | 56 | 108 | 7 | 20 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
