Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
With spring latches GN 722.1, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to be held in place if the plunger pin needs to be kept temporarily from protruding. The stainless steel version A4 is suitable for use in particularly aggressive environments.
The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer or in case of contamination.
For fastening by welding, the unmounted type AU is particularly recommended to avoid changes to the microstructure of the material due to heating of the spring and plunger pin. In this case, the indexing plunger is assembled only after the surface treatment of the welded guide.
Countersunk screw
Stainless steel
RoHS
| A | Square, latch riveted, not removable |
| AU | Square, latch screwed, removable |
| R | Round, latch riveted, not removable |
| RU | Round, latch screwed, removable |
| d1 Type A / AU Pin -0,05/-0,25 Bore +0,1/+0,3 | d1 Type R / RU Pin -0,05/-0,25 Bore +0,2/+0,4 | s Type A / AU | d2 Type R / RU | l1 ≈ | l2 | l3 | l4 | A/F Type AU / RU | Spring load in N ≈ initial | end |
|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 8 | 20 | 20 | 54 | 14 | 35 | 37 | 2,5 | 14 | 35 |
| 10 | 10 | 20 | 20 | 54 | 14 | 35 | 37 | 2,5 | 14 | 35 |
| 12 | 12 | 20 | 20 | 54 | 14 | 35 | 37 | 2,5 | 14 | 35 |
| 14 | 14 | 20 | 20 | 54 | 14 | 35 | 37 | 2,5 | 14 | 35 |
| 16 | 16 | 30 | 30 | 83 | 20 | 54 | 55 | 4 | 22 | 70 |
| 20 | 20 | 30 | 30 | 83 | 20 | 54 | 55 | 4 | 22 | 70 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
