Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Thrust pads GN 631.2 are used for clamping and pressing when surfaces must be protected against damage. They also counteract slipping, dampen shocks and reduce noise. The disk is encased in vulcanized rubber to ensure high load capacity and dimensional stability.
Depending on the application, various standard parts with ball thrust point are available as accessories.
Together with the thrust pad, the ball thrust point forms a ball joint that adapts to clamping surfaces that are uneven or not perpendicular to the screw axis. It also prevents the clamping surface from rotating when the thrust pad is in contact with the clamping surface.
The ball thrust point snaps securely into the thrust pad and can be removed again if needed.
Acrylonitrile-butadiene-rubber (NBR)
85 ±5 Shore A85
Operating temperature up to 120 °C
Black, matte finishSW
Washer
Stainless steel AISI 304
RoHS
Grub Screws GN 632.1 (Steel)
Grub Screws GN 632.5 (Stainless Steel)
Adjustable Hand Levers GN 306
Star Knobs GN 6336.11
Knurled Screws GN 7336.5
Knurled Screws GN 421.11
Clamping Screws GN 903
Clamping Screws GN 903
Stainless Steel Hex Head Screws GN 933.5
Other Shore hardnesses
| d1 | d2 | d3 | e ≈ | h1 | h2 |
|---|---|---|---|---|---|
| 14 | 4,5 | M 6 | 1 | 7,5 | 2 |
| 19 | 6,1 | M 8 | 1,5 | 10 | 3 |
| 25 | 7,8 | M 10 | 1,5 | 11 | 3 |
| 32 | 9,4 | M 12 | 2 | 13 | 4 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
