Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of the door.
Thanks to the stainless steel materials used, the latches are optimally suited for use in corrosive environments.
Latch arms are available with different bend angles to cover a latch arm distance A from 6 to 50 mm.
Latches GN 115 are supplied with loosely enclosed latch arm.
Lock housing
Stainless steelNI AISI 303
Latch arm
Stainless steel AISI 304
Other parts
Stainless steel AISI 304
Protection class IP 65
RoHS
Socket Keys GN 119.2
Opening Handles GN 120.1
Protective Guide Plates GN 120.2
Internal Cabinet Handles GN 120.3
Sheet Metal Punches GN 123
Protective Caps GN 120
Other operations
| DK | With triangular spindle |
| VK7 | With square spindle |
| VK8 | With square spindle |
| SCH | With slot |
| VDE | With double bit |
| Latch distance A | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 10 | 14 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 34 | 38 | 40 | 50 |
|
For installation, set a hole in the door, cover or hatch as shown in the outline drawing. Once assembled, the latch is pushed through the bore diameter from the front. The hex nut can then be pushed over the latch from the back and bolted in place. The required installation bore in the door leaf, is usually generated by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches GN 123 are the tool of choice. |
||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
