Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Our customers in the USA are serviced by JW Winco. Please, use the website jwwinco.com
Holding bushings GN 1140 are designed for ball lock pins, such as GN 113.3, or locking pins GN 114.2. They are used when the existing wall thickness is thin or for installation in a blind hole. They also provide reinforcement when the locking pin or ball lock pin is used with soft, sensitive materials.
Type B establishes a defined screw-in depth due to the collar. Type S with countersunk head allows for centered, flush installation in an easily created hole.
The holding bushings fit the following locking pins and ball lock pins: GN 113.3, GN 113.4, GN 113.5, GN 113.6, GN 113.7, GN 113.8, GN 113.9, GN 113.10, GN 113.11, GN 113.12, GN 113.30, GN 114.2, GN 114.3, GN 114.6, GN 124.2, GN 124.3, GN 214.2, GN 214.3, GN 214.6
Stainless steel AISI 303NI
RoHS
| B | With collar |
| S | With countersunk head |
| d1 | d2 | d3 | d4 | d5 | d6 | l1 ≈ | l2 | l3 | sw | t1 | t2 | t3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 +0,10/+0,02 | M 12 | 16 | 18 | 9,4 | 6,5 | 16,5 | 21 | 2 | 4 | 10 | 1,5 | 17,5 |
| 6 +0,10/+0,02 | M 14 | 18 | 20 | 11,4 | 8,2 | 17,5 | 23 | 2 | 5 | 10 | 2,5 | 18,5 |
| 8 +0,10/+0,02 | M 16 | 20 | 22 | 13 | 11,1 | 19,5 | 25 | 3 | 6 | 10 | 3 | 20,5 |
| 10 +0,15/+0,05 | M 20 | 25 | 27 | 16,4 | 13,4 | 21,5 | 28 | 3 | 8 | 10 | 4 | 22 |
| 12 +0,15/+0,05 | M 24 | 30 | 32 | 19,6 | 15,4 | 29,5 | 39 | 4 | 10 | 20 | 5 | 33,5 |
| 16 +0,15/+0,05 | M 30 | 36 | 38 | 25 | 20,3 | 33,5 | 43 | 4 | 10 | 20 | 7 | 36,5 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
