Lifting Points GN 589

Standard sheet GN 589 Print this page Load capacity and safety instructions Operating instruction GN 589

Product description

Lifting points GN 589 are distinguished for their very low dimensions. They provide high dynamic and static strength and can be load from any direction with approved safety (safety factor 4) for all loading directions.

The rated load carrying capacity listed in the above table is clearly marked on the lifting point. It applies to the most unfavourable load application of the load types listed opposite.

Lifting points GN 589 comply with Mechanical Engineering Directive 2006 / 42 / EG.

The operating instructions contain further important information and notes. It is part of the scope of delivery and can be downloaded as a PDF at ganternorm.com/service/downloads/operating-instructions as a PDF file.

Specification

Steel German Material No. 1.6541

Forged
High-tensile tempered
100 % electro magnetic tensile tested to EN 1677
Phosphated

RoHS

GN 589 Lifting points for welding sketch

Hide technical drawing

Article options / Table

Show / Hide columns

b	d	h₁	h₂	k₁	k₂	Nominal Load in t (WLL)	max. permitted lashing force in daN (LC)

100	35	41,5	57	16	30	1,6	3200
137	50	59	80	23	41	3,2	6400
172	60	71,5	99	27	51	5	10000
228	80	95	130	38	70	10	20000

Build & Price

Width b

100

137

172

228

Load capacity

Method of
mounting

Number

3 and 4

Angles of
inclination

0°

90°

0°

90°

0° to 45°

45° to 60°

asymm.

0°
to
45°

45° to 60°

asymm.

Factor

1,4

2,1

1,5

100
137
172
228

1,6 t
3,2 t
5,0 t
10,0 t

3,2 t
6,4 t
10,0 t
20,0 t

2,2 t
4,5 t
7,1 t
14,1 t

1,6 t
3,2 t
5,0 t
10,0 t

3,4 t
6,8 t
10,6 t
21,2 t

2,4 t
4,8 t
7,5 t
15,0 t

1,6 t
3,2 t
5,0 t
10,0 t

Safety instructions

The above details specify the maximum load in metric tonnes.

Carefully check the wear markings for the abrasion of the lifting point.

Use permitted n
o traces of wear

Use not permitted
Criteria reached:
Material worn down
to the wear marks

Show / Hide columns

Lifting point b	Size fillet seam a	Length	Volume in cm³

100 (1.6 t)	4	251	4,02
137 (3.2 t)	6	344	12,38
172 (5.0 t)	7	431	21,1
228 (10.0 t)	8	576	36,86

Welding must be made by an approved welder in accordance with EN 287-1.
The specified loading values are valid for an operating temperature of between –40 °C and +200 °C. Load capacities under higher temperatures provided on request.

The operating instruction contains further guidelines and is included with every lifting point.

Selected Part (How to order)

Part number

Total (net)

35,50 €

plus VAT 6,75 €
gross 42,25 €

In stock

Weight: 0,435 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Customs tariff number

73269098

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €

Quantity

All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.