GN 344.2 Leveling Feet Threaded Stud Steel, Foot Antistatic ESD Plastic

Information

Leveling feet GN 344.2 feature a conductive ESD plastic material (PA) or rubber (NBR) which prevents static charges from building up. The imprint ESD-C on the surface of the leveling feet indicates the special antistatic properties according to ICE 61340-5-1.

These leveling feet have a high load-bearing capacity which is achieved by the use of a very high grade plastic material. In addition, their stepped base also helps to spread the load over a wider area.

The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic foot could occur.

The values were arrived at by a series of tests whereby a limited number of leveling feet were subjected for a limited time to a vertical static load to the feet.

The listed load capacities are non-binding guide values; the manufacturer accepts no liability for their performance. In general, they do not constitute a warranty of condition. The user must determine from case to case whether a product is suitable for the intended use.

Leveling feet GN 344.2 are delivered assembled, but can also be disassembled.

Specification

Foot
Plastic
Technoplymer (Polyamide PA)

• Glass fiber reinforced
• Black, matte finish
• Temperature resistant up to 100 °C
• Electrically conductive
• Surface resistivity 10³ Ω
  (ASTM D257 measuring method)
• Volume resistivity 10³ Ω
  (ASTM D257 measuring method)

Threaded stud
Steel

• Zinc plated, blue passivated

Hexagon nut ISO 4032
Steel
Zinc plated, blue passivated

Rubber underlay (NBR)

• 70 Shore A, black
• Electrically conductive
• Surface resistivity 10³ Ω
  (ASTM D991 measuring methode)
• Volume resistivity 10³ Ω
  (ASTM D991 measuring methode)

RoHS