GN 817.6 Indexing Plungers Stainless Steel, with Sensor for Position Monitoring

Photo

GN 817.6 Indexing Plungers, Stainless Steel, with Sensor for Position Monitoring Type: EB - With engagement monitoring, without rest position
Type: EB - With engagement monitoring, without rest position
GN 817.6 Indexing Plungers, Stainless Steel, with Sensor for Position Monitoring Type: EB - With engagement monitoring, without rest position GN 817.6 Indexing Plungers, Stainless Steel, with Sensor for Position Monitoring Type: EC - With engagement monitoring, with rest position
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

Indexing plungers GN 817.6 with sensor for position monitoring allow for electronic monitoring of the plunger pin state. For this purpose, a magnet is integrated into the plunger pin that switches the sensor upon engaging after approx. 2/3 of the locking distance l1.

The sensor electronics then outputs a high signal, e.g. to a machine control, and additionally indicates this switch state with an LED on the sensor.

To prevent faults, no external magnetic fields should be acting on the indexing plunger. The indexing plungers GN 817.6 are delivered with enclosed sensor, sensor clip, Allen® wrench and a hexagon nut.

Specification

  • Stainless steel AISI 303
    Plunger pin chemically nickel plated

  • Knob
    Plastic (Polyamide PA)
    • Black, matte finish
    • Not removable

  • Magnet
    Hard ferrite

  • Sensor / Sensor clip
    Plastic (Polyamide PA)
    Black, matte finish

  • Cable (Outer sheath)
    Polyurethan PUR, black

  • Hex nut ISO 8675
    Stainless steel

RoHS

Technical drawing

3D
Hide technical drawing
GN 817.6 Indexing Plungers, Stainless Steel, with Sensor for Position Monitoring sketch

Article options / Table

Type

EBWith engagement monitoring, without rest position
ECWith engagement monitoring, with rest position

Connection type

SPlug
Show / Hide columns
d1
Pin -0,02/-0,05
Bore H7
l1Cable length l5
in meter
d2d3d4kl2l3l4A/FSpring load in N ≈
Initial

End
460,5M 8 x 11621441,51611,510412,5
580,5M 10 x 11921646,51812,512518
690,5M 12 x 1,52322054,52212,514625
8120,5M 16 x 1,52822464,52614,5178,528
10120,5M 16 x 1,52822464,52614,5179,538
12150,5M 20 x 1,533228,5783316,52211,540
16200,5M 24 x 233228,5853818,5271354

Build & Price

Open 3D configurator
Plunger pin diameter d1
l1
Type


Connection type

Cable length l5

Electrical properties of the sensor

Output function

Normally open (NO)

Switch output

PNP

GN 817.6 Skizze 1

Supply voltage

10 - 30 V DC

Continuous current Ia

≤ 100 mA

Connection type
Plug (S)

3-pole plug M8x1,
freely rotating with knurled screw connection,
with PUR cable 0.5 m

GN 817.6 Skizze 2

Protection class

IP 67

Switching frequency

1.000 Hz

Power consumption

≤ 8 mA

Voltage drop

≤ 2.5 V

Protection class

III

Response sensitivity

2.8 mT

Temperature range

-25 °C ... +75 °C

Shock and vibration resistance

30 g, 11 ms / 10 ... 55 Hz, 1 mm

EMC

According to EN 60947-5-2

Reverse polarity protection

Yes

Short-circuit protection

Yes

**Activation impulse
**suppression

Yes

Approvals, conformity declarations

CE marking

Assembly instruction

GN 817.6 Skizze 3

The position of the sensor cable can be chosen freely during installation of the sensor clip.

Installation steps:

  1. Insert the sensor into the sensor clip from the side.
  2. Tighten the hexagon socket screw of the sensor.
  3. Clip the sensor clip into the ring groove of the indexing plunger in any orientation and then adjust the direction by turning, if necessary.

Selected Part (How to order)

Total (net)
72,30
plus VAT 13,74 €
gross 86,04 €
In stock
Weight: 0,027 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Customs tariff number
73181900
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 49,99 €
All prices in accordance with our price list No. 56, valid from 1 September 2024, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 817.6-4-6-EB-S-0,5GN 817.6-4-6-EC-S-0,5GN 817.6-5-8-EB-S-0,5GN 817.6-5-8-EC-S-0,5GN 817.6-6-9-EB-S-0,5GN 817.6-6-9-EC-S-0,5GN 817.6-8-12-EB-S-0,5GN 817.6-8-12-EC-S-0,5GN 817.6-10-12-EB-S-0,5GN 817.6-10-12-EC-S-0,5GN 817.6-12-15-EB-S-0,5GN 817.6-12-15-EC-S-0,5GN 817.6-16-20-EB-S-0,5GN 817.6-16-20-EC-S-0,5

This could also be interesting...

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM:

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.